Abstract:In airborne earth observation system, due to the movement of the flight and the vibration of the payload, the quality of the picture captured will degrade severely because there exists a relative motion between the object and the imaging system. With the development of high-performance, high-resolution CCD / CMOS technique and the further optimization of imaging lens, the platform vibration becomes an important constraint in the high-resolution imaging, and thus image stabilization for imaging systems is indispensable. The first step in image stabilization is to obtain the vibration path by means of detecting the direction and length of the shake, and then to compensate for the shake using some methods to eliminate the impact of vibration. In order to satisfy the need of fast displacement detection in the image stabilization of airborne remote sensing system, we perform an auto displacement detection system based on joint optical correlator in this paper. First we employ a vibration platform to simulate the scene with vibration in airborne remote sensing system, and a high-speed camera system is set up to grab the target to form a video sequences with no blur. Then two adjacent video frames will be input into a spatial light modulator parallelly in space, behind which a Fourier lens is fixed to capture the spectrum of the object by a high speed camera. And after a high-pass filter, this spectrum will be input into a spatial light modulator behind which fix another Fourier lens again, and another high speed camera will capture the output image indicating the correlation peak position of the adjacent two images, from which corresponding displacement vector can be calculated. Experiments show that this system works stably at a rate as high as 50 frames per second, with detection accuracy up to 0.1 pixel by centroid detection algorithm.

Lidar image blur caused by residual random vibration

Motion Blur Suppression Method Based on Dual Mode Imaging for Remote Sensing Image

Removing vibration blur from a single image based on coded exposure

Vibration Detection and Calibration Method Used to Remote Sensing Optical Camera

Research on Fast Restoration of Blurred Vibration Image Based on Vibration Detection and Coded Exposure

Image Deblurring Utilizing Inertial Sensors and a Short-Long-Short Exposure Strategy.

Study On Mtf Of Remote Sensing Imaging Under Arbitrary Known Vibration

Image Deblurring by Motion Estimation for Remote Sensing

Analysis of the Simulation Model Based on Remote Sensing Imaging under Vibration

Image Restoration for Large-Motion Blurred Lunar Remote Sensing Image

Time-delay compensation for stabilization imaging system

Restoration method of TDI remote sensing image based on optimization of numerical fidelity term

Optical Correlator Based System For Displacement Auto Detection

A method for remote sensing image restoration using gyroscope sensor

Analysis of Influence of Mechanical Vibration on Ghost Imaging

A Vibration Compensation Method Based on White-light Wavelength Scanning Interferometry

Research on the Effect of Vibrational Micro-Displacement of an Astronomical Camera on Detector Imaging

Imaging of Airborne Synthetic Aperture Ladar under Platform Vibration Condition

Time-varying Vibration Compensation for FMCW Lidar Signals

Numerical simulation and characterization of speckle noise for laser Doppler vibrometer on moving platforms (LDVom)

Response spectrum-based analysis of airborne radar random vibration and multi-point control improvement