Abstract:The optimization of gearbox ratios is crucial for achieving a balance between fuel consumption, power performance, and comfort in vehicles by regulating engine operating conditions. However, challenges exist due to the complexity of powertrain efficiency and uncertainty of future operating conditions. In this paper, a gear model prediction control algorithm based on future operating condition prediction and model accuracy compensation is proposed for a heavy-duty truck equipped with an automated manual transmission (AMT). First, a power demand and expected vehicle speed prediction algorithm is proposed using historical throttle pedal action data and vehicle dynamics model, aiming to compensate for driver intention uncertainty. Second, for the predicted operating conditions, a nonlinear model predictive control (NMPC) is used to optimize the transmission ratio with multiple objectives such as fuel consumption, power performance, and smoothness, and then discretized to the required gear ratio. Finally, the deviation between the NMPC model and the actual powertrain system is actively observed and compensated using an extended state observer (ESO) to improve the robustness to uncertainty factors such as vehicle weight and slope. Simulation results show that: 1) Under the condition of deep throttle acceleration, the future operating condition prediction MPC algorithm can save about 5.67% fuel. 2) With the use of ESO, the vehicle speed tracking error is reduced by 27.6%, and energy consumption is improved by 3.51% when the vehicle cargo weight changes by 50%. 3) In a typical 65-second acceleration segment, the fuel consumption of this algorithm is reduced by 0.64% compared with the traditional offline MAP algorithm, and the vehicle speed tracking error is reduced by 2.52%.

Model Predictive Control of AMT clutch during start-up process

A Moment-of-Inertia-Driven Engine Start-Up Method Based on Adaptive Model Predictive Control for Hybrid Electric Vehicles With Drivability Optimization

Robust engine slipping start control of hybrid electric vehicles with uncertainty in clutch slipping torque and change in driver demand torque

MAP Control of Starting Clutch Based on DMC-PID Cascade Algorithm

Model referenced adaptive control to compensate slip-stick transition during clutch engagement

Adaptive Optimal Control for Automatic Clutch

AMT Clutch Engagement Position Control Based on DMC-PID Cascade Control Algorithm

System dynamic modelling and adaptive optimal control for automatic clutch engagement of vehicles

Two Layer Model Reference Adaptive Control Based on State Feedback for Engine Slipping Start of Parallel Hybrid Electric Vehicles

Automatic Clutch Control Based on Estimation of Resistance Torque for AMT

Multi-state control strategy of starting for a wet friction clutch via a fuzzy logic algorithm

Application of Feedback Linearization and Sliding Mode Control to AMT of Vehicles

Coordinated Clutch Slip Control for the Engine Start of Vehicles with P2-hybrid Automatic Transmissions

A Modified Predictive Functional Control with Sliding Mode Observer for Automated Dry Clutch Control of Vehicle

Simulation of AMT autoshift process based on matlab/simulink/stateflow

Simulation Of Wet-Clutch Short-Time Load End Speed Control System On Amesim

A Study on the Start Process Simulation of a Dual Clutch Automatic Transmission Based on Fuzzy Control

Neural-Network-Based Predictive Control for PMSM Drives

Engagement Control of Automated Clutch for Vehicle Launching Considering the Instantaneous Changes of Driver's Intention

Wet Dual Clutch Launching Adaptive Control Considering Service Time

Extended Stated Model Predictive Control Algorithm for Gearbox Gearshifting of Heavy-Duty Trucks with Operation Condition Prediction