Abstract:Wind turbine blades perform the most important function in the wind energy conversion process. It plays the most vital role of absorbing the kinetic energy of the wind, and converting it to mechanical energy before it is transformed into electrical energy by generators. In this work, National Advisory Committee for Aeronautics (NACA) 4412 and SG6043 airfoils were selected to design a small horizontal axis variable speed wind turbine blade for harvesting efficient energy from low wind speed areas. Due to the low wind profile of the targeted area, a blade of one-meter radius was considered in this study. To attain the set objectives of fast starting time and generate more torque and power at low wind speeds, optimization was carryout by varying Reynolds numbers (Re) on tip speed ratios (TSR) values of 4, 5, and 6. The blade element momentum (BEM) method was developed in MATLAB programming code to iteratively find the best twist and chord distributions along the one-meter blade length for each Re and tip speed ratio (TSR) value. To further enhance the blade performance, the twist and chord distributions were transferred to Q-blade software, where simulations of the power coefficients (Cp) were performed and further optimized by varying the angles of attack. The highest power coefficients values of 0.42, 0.43, and 0.44 were recorded with NACA 4412 rotor blades, and 0.43, 0.44, and 0.45 with SG6043 rotor blades. At the Re of 3.0 × 105, the blades were able to harvest maximum power of 144.73 watts (W), 159.69 W, and 201.04 W with the NACA 4412 and 213.15 W, 226.44 W, 245.09 W with the SG6043 at the TSR of 4, 5, and 6 respectively. The lowest cut-in speed of 1.80 m/s and 1.70 m/s were achieved with NACA 4412 and SG6043 airfoils at TSR 4. At a low wind speed of 4 m/s, the blades were able to harness an efficient power of 79.3. W and 80.10 W with both rotor blades at the TSR 4 and 6 accordingly.

Total Cost and Energy Cost of Wind Turbine Generation Systems for Low Wind Speeds

Systematic Characteristics of Vertical and Horizontal Axis Wind Turbine

Wind Farm Power Optimization Using System Identification

Cost Evaluation Method of Wind Turbine Generation System

Design and Optimization of a Small-Scale Horizontal Axis Wind Turbine Blade for Energy Harvesting at Low Wind Profile Areas

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Effects of Blade Extension on Power Production and Ultimate Loads of Wind Turbines

Increasing power coefficient of small wind turbine over a wide tip speed range by determining proper design tip speed ratio and number of blades

Strategic selection of wind turbines for low wind speed regions: Impact on cost and environmental benefits

Which wind turbine types are needed in a cost‐optimal renewable energy system?

Small Wind Turbine Blade Design and Optimization

Numerical study on the horizontal axis turbines arrangement in a wind farm: Effect of separation distance on the turbine aerodynamic power output

Centimeter-Scale Wind Turbines Design and Analysis

Design & optimization of a small wind turbine blade for operation at low wind speed

Cost Dynamics of Onshore Wind Energy in the Context of China's Carbon Neutrality Target

System design of a wind turbine using a multi-level optimization approach

Investigating the Structural and Power Performance of a 15 MW Class Wind Energy Generation System under Experimental Wind and Marine Loading

Numerical study of vertical axis wind turbine rotor configuration

Power Optimization of NACA 0018 Airfoil Blade of Horizontal Axis Wind Turbine by CFD Analysis

Small Horizontal Wind Turbine Design and Aerodynamic Analysis Using Q-Blade Software

A Study on the Economic Conditions of Wind Turbine Generation System with Doubly Fed Synchronous Generator