Abstract:Small wind turbines (SWTs) face tremendous challenges in being developed into a more reliable and widespread energy solution, with a number of efficiency, reliability, and cost issues that are yet to be resolved. As part of the development stages of an SWT, testing the resulting efficiency and determining appropriate working ranges are of high importance. In this paper, a methodology is presented for testing SWTs to obtain characteristic performance curves such as Cp (power coefficient) vs. TSR (tip–speed ratio), and torque vs. ω, in a simpler and faster yet accurate manner as an alternative energy solution when a wind tunnel is not available. The performance curves are obtained with the SWT mounted on a platform moving along a runway, requiring only a few minutes of data acquisition. Furthermore, it is only required to measure a single variable, i.e., the generator output voltage. A suitable physics-based mathematical model for the system allows for deriving the desired performance curves from this set of minimal data. The methodology was demonstrated by testing a prototype SWT developed by the authors. The tested prototype had a permanent magnet synchronous generator, but the methodology can be applied to any type of generator with a suitable mathematical model. Given its level of simplicity, accuracy, low cost, and ease of implementation, the proposed testing method has advantages that are helpful in the development process of SWTs, especially if access to a proper wind tunnel is prevented for any reason. To validate the methodology, Cp vs. TSR curves were obtained for an SWT prototype tested under different test conditions, arriving always at the same curve as would be expected. In this case, the test prototype reached a maximum power coefficient (Cp) of 0.35 for wind velocities from 20 to 50 km/h for a TSR of 5.5.

Centimeter-Scale Wind Turbines Design and Analysis

A design and performance prediction method for small horizontal axis wind turbines and its application

Analyzing and Validating Energy Performance through Computational Simulation of a Helical Vertical Axis Wind Turbine

Savonius Wind Turbine Numerical Parametric Analysis Using Space-Filling Design and Gaussian Stochastic Process

Design of Dynamic Simulation of Wind Turbine

Experimental and Numerical Analysis Design of a Lab-Scale on Horizontal Axis Wind Turbine with Winglets

Fast Power Coefficient vs. Tip–Speed Ratio Curves for Small Wind Turbines with Single-Variable Measurements Following a Single Test Run

Archimedes Spiral Wind Turbine performance study using different aerofoiled blade profiles: Experimental and numerical analyses

Performance Enhancement of Horizontal Axis Wind Turbine Using Numerical Techniques

Investigations of the performance of 3D printed micro wind turbine composed of PLA material

Small Wind Turbine Blade Design and Optimization

A New Miniature Wind Turbine for Wind Tunnel Experiments. Part I: Design and Performance

Design optimization methodology of small horizontal axis wind turbine blades using a hybrid CFD/BEM/GA approach

Experimental and Numerical Investigation of Vortex Generators and Winglets in Horizontal Axis Wind Turbine Blade Design

Numerical Investigation of Hybrid Savonius-Darrieus Vertical Axis Wind Turbine at Low Wind Speeds

Investigation of a horizontal low power wind turbine

Wind Tunnel Tests of a Model Small-Scale Horizontal-Axis Wind Turbine Developed From Blade Element Momentum Theory

Small Horizontal Wind Turbine Design and Aerodynamic Analysis Using Q-Blade Software

Control System for the Performance Analysis of Turbines at Laboratory Scale

Fluid–Structure Interaction Numerical Analysis of a Small, Urban Wind Turbine Blade