Abstract:We report a type of multimode fiber interferometers (MMI) formed in photonic crystal fiber (PCF). To excite the cladding modes from the fundamental core mode of a PCF, a coupling point is formed. To form the coupling point, we used the method that is blowing compressed gas into the air-holes and discharging at one point, and the air-holes in this point will expand due to gas expansion in the discharge process. By placing two coupling points in series, a very simple all-fiber MMI can be implemented. The detailed fabrication process is that the one end of the PCF is tightly sealed by a short section of single mode fiber (SMF) spliced to the PCF. The other end of the PCF is sealed into a gas chamber and the opened air holes are pressurized. The PCF is then heated locally by the fusion splicer and the holes with higher gas pressure will expand locally where two bubbles formed. We tested the RI responses of fabricated sensors at room temperature by immersing the sensor into solutions with different NaCl concentration. Experimental results show that as refractive-index (RI) increases, the resonance wavelength of the MMI moves toward longer wavelengths. The sensitivity coefficients are estimated by the linear fitting line, which is 46nm/RIU, 154mn/RIU with the interferometer lengths (IL) of 3mm and 6mm. The interferometer with larger IL has higher RI sensitivity. The temperature cross-sensitivity of the sensor is also tested. The temperature sensitivity can be as low as -16.0pm/degrees C.

Curvature Measurement with Photonic Crystal Fiber Based Mach-Zehnder Interferometer

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

An In-Fiber Mach-Zehnder Interferometer Based on Dual Side-Hole Fiber for Highly Sensitive Measurement of Curvature

A Curvature Mach-Zehnder Interferometer Fiber Sensor Based on Triple Cladding and Coreless Fiber

Photonic crystal all-fiber Mach-Zehnder Interferometer sensor based on phase demodulation

Curvature sensor based on femtosecond laser-inscribed straight waveguide in FMF

A Novel MZI Fiber Sensor with Enhanced Curvature and Strain Sensitivity Based on Four-Core Fiber

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

High-Sensitivity Curvature Fiber Sensor Based on Miniature Two-Path Mach-Zehnder Interferometer

Bent Fiber Interferometer

In-Fiber Mach-Zehnder Interferometer Exploiting a Micro-Cavity For Strain and Temperature Simultaneous Measurement

Comparative Analyses of Bi-Tapered Fiber Mach–Zehnder Interferometer for Refractive Index Sensing

In-Fiber Mach-Zehnder Interferometer Based on Three-Core Fiber for Measurement of Directional Bending

High-Performance Bending Sensor Based on Femtosecond Laser-Inscribed in-Fiber Mach–Zehnder Interferometer

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure

Photonic crystal fiber refractive-index sensor based on multimode interferometry

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

Highly sensitive strain sensing using a polarization-maintaining photonic crystal fibre based Mach–Zehnder interferometer