Abstract:Most accelerometers today are based on the capacitive principle. However, further miniaturization for micro integration of those sensors leads to a poorer signal-to-noise ratio due to a small total area of the capacitor plates. Thus, other transducer principles should be taken into account to develop smaller sensors. This paper presents the development and realization of a miniaturized accelerometer based on the tunneling effect, whereas its highly sensitive effect regarding the tunneling distance is used to detect small deflections in the range of sub-nm. The spring-mass-system is manufactured by a surface micro-machining foundry process. The area of the shown polysilicon (PolySi) sensor structures has a size smaller than 100 μm × 50 μm (L × W). The tunneling electrodes are placed and patterned by a focused ion beam (FIB) and gas injection system (GIS) with MeCpPtMe3 as a precursor. A dual-beam system enables maximum flexibility for post-processing of the spring-mass-system and patterning of sharp tips with radii in the range of a few nm and initial distances between the electrodes of about 30–300 nm. The use of metal–organic precursor material platinum carbon (PtC) limits the tunneling currents to about 150 pA due to the high inherent resistance. The measuring range is set to 20 g. The sensitivity of the sensor signal, which depends exponentially on the electrode distance due to the tunneling effect, ranges from 0.4 pA/g at 0 g in the sensor operational point up to 20.9 pA/g at 20 g. The acceleration-equivalent thermal noise amplitude is calculated to be 2.4–3.4 mg/Hz. Electrostatic actuators are used to lead the electrodes in distances where direct quantum tunneling occurs.

A Novel Mems Field Emission Accelerometer Based on Silicon Nanotips Array

A Novel, Hybrid-Integrated, High-Precision, Vacuum Microelectronic Accelerometer with Nano-Field Emission Tips.

Single Chip-Based Nano-Optomechanical Accelerometer Based on Subwavelength Grating Pair and Rotated Serpentine Springs

A Novel Scheme Design of a High-G Optical NEMS Accelerometer Based on a Single Chip Grating with Proper Sensitivity and Large Bandwidth

A New Type of MEMS Accelerometer with Up-Tuning Structure

A Novel Integrated High Precision Vacuum Microelectronic Accelerometer

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

Novel Capacitive Sensing System Design of A Microelectromechanical Systems Accelerometer for Gravity Measurement Applications

A Pendulous Micromachined Silicon Accelerometer

A novel out-of-plane MEMS tunneling accelerometer

Development and Proof of Concept of a Miniaturized MEMS Quantum Tunneling Accelerometer Based on PtC Tips by Focused Ion Beam 3D Nano-Patterning

An Electromagnetically Excited Silicon Nitride Beam Resonant Accelerometer

Fabrication and Performance of a Bulk 4H-Sic Mems Piezoresistive Accelerometer

A MEMS Micro-g Capacitive Accelerometer Based on Through-Silicon-Wafer-Etching Process

Silicon Micromachined Resonant Accelerometer Based on ZnO Nanowire

A MEMS Electrochemical Angular Accelerometer with Silicon-Based Four-Electrode Structure

A Resonant Z-Axis Aluminum Nitride Thin-Film Piezoelectric MEMS Accelerometer

Design, Manufacture And Test Of Novel Mems Piezoresistive Accelerometer For High G Application

A micromachined silicon resonant accelerometer

Novel Area-Changed Capacitive Methods for Simultaneous Displacement Transducing and Force Balance in a Nano-g MEMS Accelerometer

Novel High Sensitivity Accelerometer Based on A Microfiber Loop Resonator