Abstract:A numerical model describing the ballistic behavior of a commercially used initiator is presented in this article. This model was built on the principle of conservation of mass and energy in the multi-phase framework incorporated with multi-loaded conditions. After obtaining the information about the grain size distribution in each composite, a fixing factor was proposed based on the surface area ratio of the composites. Thus, the solid propellant burning process based on distributed grain size was described, and the burn rate parameters of the applied pyrotechnic compositions were re-evaluated for different preconditioned temperature levels according to Vieille’s law. The influence of bridge wire and initiator metal cap was further modeled concerning their characteristic properties according to the observed measurements. The validation of the entire initiator model in the closed bomb test showed quantitative agreement with the measured pressure evolution, while the parameter study for evaluating the ballistic sensitivity of each component delivered some insights into the product development process. Furthermore, the configuration of a cold gas inflator was utilized to evaluate the initiator impact for a realistic application, where the shock wave intensity during deployment serves the main function in the inflator design. Incorporated with CFD simulations to capture the shock wave propagation, 0D-3D coupling strategy for initiator ballistics to inflator configuration was realized. Besides, the simulation results reflected the physical conditions in a proper manner. In particular, the parameter study led to a better understanding of interactions between inflator components, which were barely possible to be quantified through the measurements. The proposed initiator model could also be used in combination with other mechanical principles as a component of pyrotechnic devices such as pin-puller, electric line cutters, or airbag inflators. The detailed information gained in describing the physical properties enabled us to assess the existing design quantitatively and to have better control of the product quality.

Research on the safety response rule of initiating explosive device

Study on the Distribution Model of Exploding Foil Initiator's Ignition Sensitivity

Method of Determining the Critical Impact Velocity of Energetic Devices

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Research on a MEMS Detonated Device with Built-in Safety and Arming Device

Simulator of Pyroshock Environment and Effect Rules of Its Adjustable Parameters

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

Numerical Investigation of Pyrotechnical Initiators and Their Impact in Airbag Inflator Applications: Ballistic Modeling and Functional Analysis

Numerical Simulation and Design of Explosive Diode

Quantitative prediction and ranking of the shock sensitivity of explosives via reactive molecular dynamics simulations

Study of the Sympathetic Detonation Reaction Behavior of a Fuze Explosive Train under the Impact of Blast Fragments

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

Test to Determine the Response Level of Heterogeneous Explosive by Fragment Shock Initiation

Numerical Simulation on a Novel Dynamic Pressure Desensitization Device for Emulsion Explosives

Modelling on Shock-Induced Energy Release Behavior of Reactive Materials considering Mechanical-Thermal-Chemical Coupled Effect

Optimal Design and Experimental Research of Dynamic Pressure Desensitization Device of Emulsion Explosives

Simulation-based personal fatality risk assessment due to the fragmentation hazard

Study on margin validating method of the first element in explosive device

Experimental Study on the Performance of a Novel Unidirectional Explosive Element and an Explosive Logic Network

Analysis of air blast effect for explosives in a large scale detonation

Dynamic Response Analysis of an Armored Vehicle under Explosive Loading