Abstract:This research proposes a thermal profile prediction model in the soldering reflow process (SRP). The thermal profile is the temperature of the solder paste during SRP and is affected by multiple factors [i.e., temperature setting for the oven chamber (thermal recipe) and conveyor belt speed]. The quality of the printed circuit board (PCB) is determined mainly by the thermal profile, because the components are attached to the board by the solder joint, which is generated during SRP. The thermal profile shape decides the performance of the solder joint, such as its strength. Solder paste manufacturers usually provide a target profile based on the physical properties of the solder paste composition. Comparing the experimental profile and target profile is the most simple, direct, and effective way to judge the PCB quality. In general, the thermal profile is collected from the thermocouples attached to the solder paste. To overcome drawbacks such as low testing efficiency, a noncontact machine learning-based thermal profile prediction model is developed in this research to monitor thermal performance. The noncontact prediction is of great significance to the PCB production line and meets the requirements of Industry 4.0 with a high degree of automation. Specifically, the prediction model is developed based on an artificial neural network (ANN). Several environmental factors are utilized as input data to forecast the board temperature. Then, a pooling model is devised to address the thermal profile. The proposed model is mainly for the passive components, such as 1005. The prediction model shows the promising ability to predict the thermal profile by showing a 97.2% accuracy with the testing data.

Optimization Study of Reflow Soldering Profile for Surface Mount Technology

Forecasting and Parameters Optimization of Reflow Soldering Profile Based on BPNN and GA

Reflow Soldering Process Virtual Test Based on BPNN-GA and ANSYS

Multi-objective Intelligent Optimization of Injection Molding Parameters Based on BP-NSGA

The Setting Approach for Reflow Soldering Parameter Based on the Improved ANN-GA

Optimization Method for Hot Air Reflow Soldering Process Based on Robust Design

CNC Machine Tool Temperature Measuring Point Optimization and Thermal Error Modeling Based on Stimulated Annealing and Optimized BP Network by Genetic Algorithm

Optimization and Control of Reflow Profile Based on Heating Factor

Structural optimization of thermal stresses in BGA solder joints based on improved BP neural network-genetic algorithm

Research of Intellectual Calculation in Welding Parameters Optimization

Quality Prediction for Post Reflow Based on Artificial Neural Networks in the Surface Mounted Process

Optimization of Passive Chip Components Placement with Self-Alignment Effect for Advanced Surface Mounting Technology

Effects of the Solder Phase Transformation on the Optimization of Reflow Soldering Parameters and Temperature Profiles

Reflow Profile Optimization of Μbga Solder Joints Considering Reflow Temperature and Time Coupling

Optimization of Micro-Channel Heat Sink Based on Genetic Algorithm and Back Propagation Neural Network

Noncontact Reflow Oven Thermal Profile Prediction Based on Artificial Neural Network

Process Parameter Optimization of MEM200 Rapid Prototyping Machine Based on BP Neural Network

An intelligent system for reflow oven temperature settings based on hybrid physics-machine learning model

Multi-Objective Optimization and Analysis Model of Sintering Process Based on Bp Neural Network

Determination of Smarter Reflow Profile to Achieve a Uniform Temperature Throughout a Board