Abstract:This research proposes a thermal profile prediction model in the soldering reflow process (SRP). The thermal profile is the temperature of the solder paste during SRP and is affected by multiple factors [i.e., temperature setting for the oven chamber (thermal recipe) and conveyor belt speed]. The quality of the printed circuit board (PCB) is determined mainly by the thermal profile, because the components are attached to the board by the solder joint, which is generated during SRP. The thermal profile shape decides the performance of the solder joint, such as its strength. Solder paste manufacturers usually provide a target profile based on the physical properties of the solder paste composition. Comparing the experimental profile and target profile is the most simple, direct, and effective way to judge the PCB quality. In general, the thermal profile is collected from the thermocouples attached to the solder paste. To overcome drawbacks such as low testing efficiency, a noncontact machine learning-based thermal profile prediction model is developed in this research to monitor thermal performance. The noncontact prediction is of great significance to the PCB production line and meets the requirements of Industry 4.0 with a high degree of automation. Specifically, the prediction model is developed based on an artificial neural network (ANN). Several environmental factors are utilized as input data to forecast the board temperature. Then, a pooling model is devised to address the thermal profile. The proposed model is mainly for the passive components, such as 1005. The prediction model shows the promising ability to predict the thermal profile by showing a 97.2% accuracy with the testing data.

The Setting Approach for Reflow Soldering Parameter Based on the Improved ANN-GA

Reflow Soldering Process Virtual Test Based on BPNN-GA and ANSYS

Forecasting and Parameters Optimization of Reflow Soldering Profile Based on BPNN and GA

Nonlinear Semi-Parametric Modeling Mothed Based on GA-ANN

Nonlinear semi-parametric modeling method based on GA-ANN

A New DNA Genetic Algorithm and Its Application in Parameter Estimation

Optimization Study of Reflow Soldering Profile for Surface Mount Technology

Quick Parameter-Setting Approach in SMT Reflow Soldering Based on Fuzzy Associative Memory

Quality Prediction for Post Reflow Based on Artificial Neural Networks in the Surface Mounted Process

An Improved Artificial Neural Network for Laser Welding Parameter Selection and Prediction

Solder Joint Reliability Risk Estimation by AI-Assisted Simulation Framework with Genetic Algorithm to Optimize the Initial Parameters for AI Models

Noncontact Reflow Oven Thermal Profile Prediction Based on Artificial Neural Network

Research of Intellectual Calculation in Welding Parameters Optimization

An ANN／GA(Artificial Neural Network／Genetic Algorithm)for Modeling and Optimizing of Liquid Metal Extrusion Process

Soldering Parameter-Setting Approach Based on Improved Adaptive Neuro Fuzzy Inference Model

Dynamic Temperature Modeling of Continuous Annealing Furnace Using GGAP-RBF Neural Network

GA Parameter Setting and Its Application in Load Modeling

Research on GA-ANN Integration and Its Applications to Cold Extrusion Process Design

Control Parameter Optimal Tuning Method Based on Annealing-Genetic Algorithm for Complex Electromechanical System

Optimization of Robotic Welding Process Parameters Based on Genetic Neural Network