Abstract:This paper presents an improved correlation-based timing-skew calibration strategy with constant input impedance characteristics. A full sampling rate operating time-interleaved reference ADC (TI-RADC) whose interleaving factor is coprime with TI-ADC is introduced to replace the conventional single-channel reference ADC. This paper theoretically demonstrates that by setting an appropriate time interval between the sampling edge of TI-ADC and TI-RADC and aligning the sampling edge of each channel in TI-ADC with each other but not with the reference ADC, the skew of the TI-RADC would not affect the timing skew calibration of the TI-ADC. A prototype 13-bit 2-GS/s 8-way TI pipelined SAR ADC employing a 1-bit 3-way TI-RADC is fabricated in 28-nm process to verify the presented calibration strategy. Measurement results demonstrate the correctness of the calibration strategy and reveal that compared with using single-channel reference ADC operating at a decimated sampling rate, the spurs resulting from the time-variant input impedance are suppressed more than 20 dB. The prototype ADC achieves an SNDR of 60.36 dB with a near Nyquist rate input when operating at 2-GS/s. The power consumption of the prototype ADCis 252.6 mW (Including the 4.1 mW estimated digital calibration), which translates into a Walden FoM of 148.3-fJ/conversion-step.

A 14-Bit 200-Ms/S Time-Interleaved Adc Calibrated With Lms-Fir And Interpolation Filter

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

A 15-Bit, 5 MSPS SAR ADC with On-Chip Digital Calibration

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

Parallel background calibration with signal-shifted correlation for pipelined ADC

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A 14-Bit 500-Ms/s Time-Interleaved ADC with Autocorrelation-Based Time Skew Calibration

A 14-Bit 200-Ms/s Time-Interleaved Adc with Sample-Time Error Calibration

A 10-Bit 600-Ms/s Time-Interleaved SAR ADC with Interpolation-Based Timing Skew Calibration

Digital Background Calibration Techniques for 2gs/s 12bit Time-Interleaved Pipelined ADC

An All-Digital Background Calibration Technique for M-Channel Downsampling Time-Interleaved ADCs Based on Interpolation

A Digitally Calibrated 14-Bit Linear 100-Ms/S Pipelined Adc With Wideband Sampling Frontend

A 12-Bit 100 MS/s Pipelined ADC with Digital Background Calibration

A 1-Gs/s 11-B Time-Interleaved SAR ADC with Robust, Fast, and Accurate Autocorrelation-Based Background Timing-Skew Calibration

A 13-Bit 2-Gs/s Time-Interleaved ADC with Improved Correlation-Based Timing Skew Calibration Strategy

A Foreground Digital Calibration Algorithm for Time-Interleaved Adcs with Low Computational Complexity

An improved wide-range, low-complexity, fully-parallel digital background timing mismatch calibration method for dual-channel TIADC based on perfect reconstruction filter bank