Abstract:In the field of micromanipulation, there exists a pressing need for flexible manipulation systems that facilitate the intuitive performance of a range of micro-scale tasks. Parallel or serial chains of compliant flexure mechanisms, driven by piezoelectric actuators (PEAS) are ideal microposidoners for these tasks. They offer smooth, continuous motion with subnanometric accuracy. However, cross-coupling and assembly errors limit their tracking precision when multiple degrees of freedom (DOFs) are used, and current manufacturing techniques limit mechanisms to planar designs. This paper presents a methodology which enables a human operator to precisely control the motion of a multi-DOF piezo-actuated flexure mechanism with haptic feedback. An experimental master-slave manipulator is investigated, consisting of a 4-DOF hybrid parallel-serial slave mechanism. Internal sensors and kinematic information enable the estimation of slave position and orientation. From this, a bilateral haptic controller has been developed to compensate for coupling and assembly errors, and PEA hysteresis nonlinearities present in the slave mechanism. Master mechanism inverse dynamics control is implemented to offset master mechanism inertia, whilst passivity control guarantees stability. Experimental analysis demonstrates precisions of approximately 30 nm can be achieved during low speed interactions, with intuitive environmental force feedback. With appropriate choice of end-effector, the system could be used for tasks such as the assembly of microelectromechanical systems (MEMS).

Prototype Design of a 6-DOF Compliant Parallel Micro-Manipulator

Modeling and Prototype Experiment of A Six-Dof Parallel Micro-Manipulator with Nano-Scale Accuracy

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Research on a two-dimension micromanipulator with no displacement and little concentrated stress parasite

Six-DOF Micro-Manipulator Based on Compliant Parallel Mechanism with Integrated Force Sensor

Analysis and Design of a Three-Limb Six Degree-of-Freedom Parallel Micromanipulator with Flexure Hinges

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design and testing of a high precision parallel manipulator with hyperbolic–elliptic flexure hinges

A Precise and Concise 6-DOF Micromanipulatior Driven by Piezoelectric Actuators

Relationship among Input-Force, Payload, Stiffness, and Displacement of a 6-DOF Perpendicular Parallel Micromanipulator

Structure Design of Three-limbed 6-DOF Micromanipulator Driven by Piezoelectric Actuators

Modeling and Experiment of a Planar 3-DOF Parallel Micromanipulator.

Design and Optimization of a 6-DOF Singularity-Free Parallel Manipulator

Research on a Three-Link Six-Dof Micromanipulator with Flexure Hinges

Development of a 4-DOF Haptic Micromanipulator Utilizing a Hybrid Parallel-Serial Flexure Mechanism

Development of a 3-DOF in-parallel compliant micro-motion stage for micromanipulation

Relationship among input-force, payload, stiffness and displacement of a 3-DOF perpendicular parallel micro-manipulator

Design Method of 6-DOF Parallel Manipulators by Investigating the Incidence Relation Between Inputs and Outputs

Design and Analysis of 3-DOF Micromanipulator Driven by Piezoelectric Actuators

Design and Analysis of A 3-DOF Micromanipulator Driven by Piezoelectric Actuators

Modeling and Experimental Study of a Novel 3-RPR Parallel Micro-Manipulator