Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

Crack Propagation in Matrix with Inclusions by BEM

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Simulation of dynamic interactions between a crack and inclusions with scaled boundary finite element method

The Effect of Inclusion on Crack Propagation Using Extended Finite Element Method

Crack–inclusion interaction in a quasicrystal medium with nonlocal effect

MODELLING OF CRACK PROPAGATION FOR COMPOSITE MATERIALS BASED ON POLYGON SCALED BOUNDARY FINITE ELEMENTS

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

Study on Crack-Inclusion Interaction Using Digital Gradient Sensing Method

Analysis of dynamic crack propagation in two-dimensional elastic bodies by coupling the boundary element method and the bond-based peridynamics

Photoelastic Investigation of Interaction Between Matrix Crack and Different Shapes of Inclusions

Study for 2d Moving Contact Elastic Body with Closed Crack Using Bem

Simulation of the fracture behavior of inclusion-matrix interface for particle reinforced composites

Semi-Analytic Solution of Multiple Inhomogeneous Inclusions and Cracks in an Infinite Space

Boundary element method for problems with multiple types of inclusions

Development X-FEM to investigate crack propagation in inhomogeneous materials

A New Crack Propagation Algorithm Combined with the Finite Element Method

Modeling Arbitrary Crack Propagation in Coupled Shell/Solid Structures with X-FEM

Modeling Arbitrary Crack Propagation in Coupled Shell/solid Structures with X‐FEM

2D Simulation of Composite Materials Using BEM

Modeling of Interfacial Debonding Crack in Particle Reinforced Composites Using Voronoi Cell Finite Element Method