Designing Application-Specific Networks on Chips with Floorplan Information
Srinivasan Murali,Paolo Meloni,Federico Angiolini,David Atienza,Salvatore Cartas,Luca Benini,Giovanni De-Micheli,Luigi Raffo,Salvatore Carta,Giovanni De Micheli
DOI: https://doi.org/10.1109/iccad.2006.320058
2006-11-01
Abstract:With increasing communication demands of processor and memory cores in Systems on Chips (So Cs), scalable Networks on Chips (NoCs) are needed to interconnect the cores. For the use of NoCs to be feasible in today's industrial designs, a custom-tailored, application-specific NoC that satisfies the design objectives and constraints of the targeted application domain is required. In this work, we present a design methodology that automates the synthesis of such application-specific NoC architectures. We present a floorplan aware design method that considers the wiring complexity of the NoC during the topology synthesis process. This leads to detecting timing violations on the NoC links early in the design cycle and to have accurate power estimations of the interconnect. We incorporate mechanisms to prevent deadlocks during routing, which is critical for proper operation of NoCs. We integrate the NoC synthesis method with an existing design flow, automating NoC synthesis, generation, simulation and physical design processes. We also present ways to ensure design convergence across the levels. Experiments on several SoC benchmarks are presented, which show that the synthesized topologies provide a large reduction in network power consumption (2.78× on average) and improvement in performance (1.59× on average) over the best mesh and mesh-based custom topologies. An actual layout of a multimedia SoC with the NoC designed using our methodology is presented, which shows that the designed NoC supports the required frequency of operation (close to 900 MHz) without any timing violations. We could design the NoC from input specifications to layout in 4 hours, a process that usually takes several weeks.