Abstract:End-corrosion is typical damage to steel bridge piers, which will reduce the seismic performance. Unlike overall uniform corrosion, end-corrosion results in more complex stresses on bridge piers, however, there are few related studies. This study aims to analyze the mechanical performance of corroded bridge piers and to establish a method for evaluating the seismic damage status of steel piers considering circumferential uniform end-corrosion. Firstly, the effect of corrosion parameters on key performance points of bridge piers is quantitatively analyzed using the validated finite element model. The calculation method of critical displacement value corresponding to different damage states of the end-corroded bridge pier is proposed. A high-precision fiber beam element analysis model is developed to simultaneously consider the effects of end-corrosion and shear stiffness variation. The results show that the degradation degree of yield displacement of the end-corroded bridge pier is relatively small. In contrast, the ultimate displacement, capacity point displacement and bearing capacity are significantly affected by corrosion parameters, and the degradation degree after corrosion can reach more than 30%. The pier damage ratio formula proposed in this study can accurately describe the degradation of the ultimate value, and the calculation error is almost controlled within 15%. The multi-node variable section (MNVS) fiber beam model proposed in this study has higher analysis accuracy, which can be improved by more than 16% compared with the traditional fiber beam model. In addition, the accuracy of the MNVS model in the dynamic analysis is verified by inputting the seismic records under three site conditions. Finally, considering the characteristics of end-corrosion, an evaluation method and procedure for seismic damage status of the steel pier with end-corrosion is established.

Seismic performance under environment corrosion for curved beam bridges with high piers

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Residual seismic performance of steel bridges under earthquake sequence

Effect Of Corroded Surface Morphology On Ultra-Low Cycle Fatigue Of Steel Bridge Piers

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

EXPERIMENT RESEARCH ON SEISMIC PERFORMANCE OF CORRODED REINFORCED CONCRETE PIER

Seismic Performance of Reinforced Corroded Concrete Bridge Piers

Seismic performance evaluation of steel circular hollow section bridge piers with corroded ends

SPACE MECHANICAL PERFORMANCE STUDY OF HIGH-PIER AND SMALL-RADIUS CURVED BEAM BRIDGES

Performance and damage states assessment of thin-walled steel bridge piers with end-corrosion under earthquake loading

Curvature response of bridge pier subjected to earthquake action in a saline soil environment

Seismic Failure Mode of Coastal Bridge Piers Considering the Effects of Corrosion-Induced Damage

Experimental Investigation on Cyclic Behavior of Coastal Bridge Piers with Non-Uniform Corrosion under Biaxial Quasi-Static Loads

Coupled Effect of Loading and Environment of Concrete Bridge in Service Life

Performance of Corroded Bridge Piers under Cyclic Loading

Deteriorated Seismic Capacity Assessment of Reinforced Concrete Bridge Piers in Corrosive Environment

Cyclic Behavior of Corroded Reinforced Concrete Bridge Piers

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Deteriorated seismic capacity assessment of RC bridge piers in corrosive environment