Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The incremental sheet metal forming process, characterized by the step-by-step deformation of sheet metal using a simple die, is classified as a type of plastic deformation technology. This method allows for the formation of complex-shaped parts even without the use of a specialized die. Its notable characteristic lies in its low forming load and high flexibility. To accurately forecast finite element simulation outcomes for the incremental sheet forming of 2024-O aluminum alloy sheets, constructing a precise constitutive model is essential. Typically, the uniform strain range in traditional unidirectional tensile tests does not surpass 0.3, primarily due to the necking phenomenon. This limitation hampers the accurate prediction of the actual large plastic deformation process. To address this issue, a theoretical model describing the stress-strain relationship in metal plastic deformation processes is developed using crystal plasticity theory. The constitutive model for the forming of 2024-O aluminum alloy is then constructed by adjusting the hardening coefficient and hardening index. Utilizing the improved constitutive model, the incremental sheet forming process is simulated using ABAQUS software. Upon comparison with experimental results, it is observed that the Thickness Average Absolute Relative Errors (TAARE) of the adjusted constitutive model at forming angles of 60°, 55°, and 50° are 0.414%, 0.467%, and 0.256%, and The Thickness Root Mean Square Errors (TRMSE) are determined as 0.0121, 0.0116, and 0.0094, respectively. These results indicate that the constitutive model and parameters established in this study can adequately capture the mechanical behavior of 2024-O aluminum alloy during the incremental sheet forming process.

An explicit formulation of solid-shell element and its application in sheet metal forming processes

Explicit Analysis of Sheet Metal Forming Processes Using Solid-Shell Elements

An efficient multiphysics solid shell based finite element approach for modeling thin sheet metal forming processes

Study on the Vector Quadrilateral Isoparametric Shell Element with Shear Deformation

Quadratic solid–shell elements for nonlinear structural analysis and sheet metal forming simulation

An Explicit Integration Algorithm for Introducing User-Defined Thermo-Viscoplastic Constitutive Models in Fe Simulations

Plastic Anisotropy Constitutive Equation of Sheet Metal and Its Stamping Process Simulation

Research on incremental forming simulation based on an improved constitutive model

Constitutive modeling based on non-associated flow rule for anisotropic sheet metals forming

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

A robust finite strain isogeometric solid-beam element

Eight-node incompatible solid-plate element

A non-associated anisotropic plasticity model with mixed isotropic–kinematic hardening for finite element simulation of incremental sheet metal forming process

Finite Element Analysis and Design in Stainless Steel Sheet Forming and Its Experimental Comparison

Comparative Analysis of Finite Element Formulations for Simulating Hot Forming of Ti-6Al-4V Aerospace Components

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Development and application of sheet-forming simulation

Rigid-plastic finite element method and its implementation in the hydroforming processes

An efficient solid shell material point method for large deformation of thin structures

Finite Element Simulation For Blanking Process Of Sheet Metal