Abstract:A progressively reinforced cathode/electrolyte interphase (CEI) is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on Z‐LCO, i.e. the fluorination of Zr─O and densification of CEI layer driven by the chemical reaction between ZrOxFy and LiF, greatly reinforcing the toughness of CEI containing inorganic species. Consequently, Z‐LCO achieve an enhanced and reversible O3/H1‐3 phase transition and excellent electrochemical performance at 4.6/4.65 V. For LiCoO2 (LCO) operated beyond 4.55 V (vs Li/Li+), it usually suffers from severe surface degradation. Constructing a robust cathode/electrolyte interphase (CEI) is effective to alleviate the above issues, however, the correlated mechanisms still remain vague. Herein, a progressively reinforced CEI is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on LCO surface (i.e., Z‐LCO). Upon cycle, these Zr─O deposits can promote the decomposition of LiPF6, and progressively convert to the highly dispersed Zr─O─F species. In particular, the chemical reaction between LiF and Zr─O─F species further leads to the densification of CEI, which greatly reinforces its toughness and conductivity. Combining the robust CEI and thin surface rock‐salt layer of Z‐LCO, several benefits are achieved, including stabilizing the surface lattice oxygen, facilitating the interface Li+ transport kinetics, and enhancing the reversibility of O3/H1‐3 phase transition, etc. As a result, the Z‐LCO||Li cells exhibit a high capacity retention of 84.2% after 1000 cycles in 3–4.65 V, 80.9% after 1500 cycles in 3–4.6 V, and a high rate capacity of 160 mAh g−1 at 16 C (1 C = 200 mA g−1). This work provides a new insight for developing advanced LCO cathodes.

Preparation of LiCoO 2 concaved cuboctahedra and their electrochemical behavior in lithium-ion battery

Structure and electrochemical performance of LiCoO 2 cathode material in different voltage ranges

Study on the Preparation and Electrochemical Performance of LiCoO2

From Metal to Cathode Material: in situ Formation of LiCoO2 with Enhanced Cycling Performance and Suppressed Phase Transition

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Facile Synthesis of LiCoO2 Nanowires with High Electrochemical Performance

In-Situ Observation of Solid Electrolyte Interphase on LiCoO2 During Cycling to 4.5 V by AFM

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Electrochemically Driven Phase Transition in LiCoO2 Cathode

Preparation and Characterization of High-Density Spherical Licoo2 Cathode Material for Lithium Ion Batteries

Differentiating Allotropic Licoo2/Li2co2o4: A Structural and Electrochemical Study

Investigation on the Overlithiation Mechanism of LiCoO 2 Cathode for Lithium Ion Batteries

Preparation and Electrochemical Performance of Various Morphologies Cobalt Oxide as Anode Materials for Lithium-ion Batteries

Electrochemical Behavior of LiCoO2 in a Saturated Aqueous Li2SO4 Solution

Spinel-stabilized layered LiCoO2 cathode by surface reconstruction strategy

High Performances of Ultrafine and Layered LiCoO2 Powders for Lithium Batteries by a Novel Sol–gel Process

Preparation and Electrochemical Performance of Li4Ti5O12/Co3O4 Composite as an Anode of Lithium-Ion Battery

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

High cyclability of LiCoO2 at high-voltage enabled by mixed ion and electron conductor Li7.5La3Zr1.5Co0.5O12 shell

Preparation and Characterization of High-Density Spherical LiCoO_2