Abstract:Bicomponent CoPET‐PPS sea‐island fibers were successfully fabricated with a distinct sea‐island two‐phase structure. The molecular orientation, crystallization, and tensile strength of the as‐prepared fibers significantly improved with increased draw ratios. Controlling viscosity in bicomponent melt spinning is crucial for ensuring spinnability and interfacial stability. However, the significant difference in viscosity between PPS and CoPET poses a challenge to establishing the CoPET‐PPS sea‐island melt spinning system. Herein, the viscosity of PPS is regulated by blending high melt index PPS with spinning grade PPS, resulting in a viscosity ratio of CoPET to PPS over 0.5, thereby demonstrating the good spinnability of the CoPET‐PPS spinning system. The mathematical models for velocity, shear rate, and pressure distribution of CoPET‐PPS melts within the sea‐island spinning assembly are developed using Polyflow software, providing theoretical analysis for sea‐island melt spinning. CoPET‐PPS sea‐island bicomponent fibers are successfully fabricated via the facile bicomponent melt spinning technique, guided by the results of capillary rheology and simulation analysis. In addition, the condensed state structure and mechanical properties of CoPET‐PPS sea‐island fibers are significantly enhanced with increasing draw ratios. This straightforward strategy, combined with experimental and numerical simulations, is anticipated to effectively improve the spinnability of multicomponent melt spinning, especially in cases of significant viscosity differences between polymers. Highlights The CoPET‐PPS spinning system was constructed by regulating PPS viscosity. The distribution of the CoPET‐PPS melt in the spinneret holes was simulated. CoPET‐PPS fibers were fabricated based on rheology and simulation results. The mechanical properties of CoPET‐PPS fibers improve with higher draw ratios.

Conjugate Spun of Polyethylene Terephthalate Resin Modified with 1,4-Cyclohexanedimethanol

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Effect of Polycondensation Catalyst on Fiber Structure Development in High-Speed Melt Spinning of Poly (Ethylene Terephthalate)

Characterization and Application to Fiber Reinforced Composite of Catechol/polyethyleneimine Modified Polyester Fabrics by Mussel-inspiration

Poly(ethylene Terephthalate)/carbon Black Composite Fibers Prepared by Electrospinning

Preparation of High-Modulus and High-Strength Poly(Ethylene-Terephthalate) Fiber by Zone Annealing

Surface Modification of PET Fiber with Hybrid Coating and Its Effect on the Properties of PP Composites.

Study on the synthesis and properties of silk-like copolyester

Thermal and Crystallization Characteristics of Poly(ethylene Terephthalate) with Poly(oxybenzoate‐p‐trimethylene Terephthalate) Copolymer

Modification of Poly(ethylene Terephthalate) by Combination of Reactive Extrusion and Followed Solid‐state Polycondensation for Melt Foaming

Structure and Rheological Behavior of PET/WSPET Blend

Preparation of Conductive Polyester Fiber Compounded with Carbon Black

An effective strategy for the continuous fabrication of melt‐spun sea‐island bicomponent fibers with structural regulation via stretching

Synthesis and characteristics of poly(ethylene terephthalate) with EO‐PO‐EO triblock copolymers: A thermal and mechanical property study

In-situ polymerization-modification process and foaming of poly(ethylene terephthalate)

Development of Water Soluble PBT and Superfine Fibers Thereof

Structure and Mechanical Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Blended Monofilaments

New bio-based polyester with excellent spinning performance: poly(tetrahydrofuran dimethanol-co-ethylene terephthalate)

Tetradeeane Assisted PET Solid State Polycondensation

Study on Preparation of the New Modified Co-PET with 1,2-Propylene Glycol

Development of Sheath-Core Oxygen Anionic Polyester Filament