Abstract:In this study, epoxy‐terminated hyperbranched polyester (EHBP) was synthesized by epoxy‐terminated modification of hyperbranched polyester, which cross‐links poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and polycaprolactone (PCL) via epoxy‐terminated ring‐opening, while hydroxyl‐terminated groups form hydrogen bonding effect with PHBV and PCL. Together, they improved the toughness and compatibility of PHBV and PCL. Melt extrusion process was followed in order to improve the high crystallinity and poor toughness of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) blend materials. It was achieved by the incorporation of epoxy‐terminated hyperbranched polyester (EHBP) elastomer into PHBV and polycaprolactone (PCL). EHBP cross‐links PHBV and PCL through ring‐opening polymerization of epoxy‐terminated and carboxyl groups. The mass percentages of EHBP in the PHBV/PCL blends are 1, 2, 3, and 4mass%, which are expressed as 1, 2, 3, and 4 phr in the following text. Therefore, when the EHBP content was 3 phr, the Young's modulus and tensile strength of the blends are increased to 750 and 15 MPa, respectively, which was comparable to the biodegradable polymers used for packaging. Simultaneously, compatibility between PHBV and PCL has been improved and the particle size reduction of blends can be obviously observed in scanning electron microscope (SEM) images. Dynamic mechanical analysis (DMA) analysis revealed that PHBV and PCL showed improved compatibility with each other by the addition of EHBP. Differential scanning calorimetry (DSC) revealed that the decrease of crystallinity of the blend was consistent with the increase in mechanical properties. Additionally, all the bio‐blends show good thermal stability. Food overall migration studies showed that the amount of migration of composite materials in contact with food was also far lower than the national standard value. Therefore, PHBV/PCL/EHBP blends are expected to be used in the field of food packaging.

Blend toughening of poly(vinyl chloride) by chlorinated polyethylene/hydroxy ethyl acrylate graft copolymer

Studies on Mechanical and Rheological Properties of Poly(Vinyl Chloride) Modified with Elastomers and Rigid Organic Particles

Blends of Poly(vinyl Chloride) with Acrylonitrile‐chlorinated Polyethylene‐styrene Copolymer. II. Mechanical Properties

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Toward Highly Toughened Polylactide/Polycaprolactone‐Based Polyurethane Blends With Shape Memory Property via Reactive Blending

Improving the compatibility and toughness of sustainable polylactide/poly(butylene adipate-co-terephthalate) blends by incorporation of peroxide and diacrylate

Toughening Modification of Poly(Butylene Terephthalate)/Polycarbonate Blends by Poly(Ethylene-Co-Octene)

Properties of Poly(butylene Terephthalate)/bisphenol A Polycarbonate Blends Toughening with Epoxy-Functionalized Acrylonitrile–Butadiene–Styrene Particles

Toughening Modification of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Blends by an Epoxy-Functionalized Elastomer

Miscibility, Phase Behavior, and Mechanical Properties of Ternary Blends of Poly(vinyl Chloride)/polystyrene/chlorinated Polyethylene-Graft-polystyrene

Toughening modification of PBT/PC blends with PTW and POE

Enhanced compatibility and toughness of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/polycaprolactone blends by ring‐opening polymerization and hydrogen bonding of epoxy‐terminated hyperbranched polyester

Toughening of polylactide with epoxy-functionalized methyl methacrylate–butyl acrylate copolymer

Toughening of Poly(Lactic Acid) by Ethylene-Co-Vinyl Acetate Copolymer with Different Vinyl Acetate Contents

Enhanced Toughness of PLLA/PCL Blends Using Poly(d-Lactide)-poly(ε-caprolactone)-poly(d-lactide) As Compatibilizer

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

Super toughed poly (lactic acid)/poly (ethylene vinyl acetate) blends compatibilized by ethylene-methyl acrylate-glycidyl methacrylate copolymer

High Performance Polylactide Toughened by Supertough Polyester Thermoplastic Elastomers: Properties and Mechanism

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid)

Influence of high density polyethylene-g-maleic anhydride on compatibility and properties of poly(butylene terephthalate)/high density polyethylene blends