Abstract:Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC-graft-ethylene-co-acrylic acid (PC-graft-EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene-acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC-graft-EAA. Copyright (C) 2007 John Wiley & Sons, Ltd.

Miscibility, Phase Behavior, and Mechanical Properties of Ternary Blends of Poly(vinyl Chloride)/polystyrene/chlorinated Polyethylene-Graft-polystyrene

Compatibilizing Effect of Polystyrene-Block-Poly(4-Vinylpyridine) for Poly(2,6-Dimethyl-1,4-Phenyleneoxide) Chlorinated Polyethylene Blends

A Multiblock Copolymer Compatibilizer for PVC/Polyolefin Blends

Mechanical, morphological, and thermal properties of (thermoplastic polyurethane)/(chlorinated polyethylene) blends

Compatibilisation of Blends of Poly(vinyl Chloride) and Poly(styrene-Block-(ethylene-co-butadiene)-block–styrene) with Maleic Anhydride Grafting

Compatibilization and morphology development of immiscible ternary polymer blends

Compatibilization Effect of Poly(ε-caprolactone)-<i>b</i>-poly(ethylene glycol) Block Copolymers and Phase Morphology Analysis in Immiscible Poly(lactide)/Poly(ε-caprolactone) Blends

Rheological behavior and morphology of blends of copolymers of ?-methylstyrene-co-acrylate with PVC

Blends of Poly(vinyl Chloride) with Acrylonitrile‐chlorinated Polyethylene‐styrene Copolymer. II. Mechanical Properties

Insight on Compatibilization of LLDPE/PS Blends from Morphology, Interfacial State, Mechanical Properties and Melt Properties: Comb-like Copolymer Vs Diblock Copolymer

A STUDY ON POLYVINYL-CHLORIDE) BLENDS WITH CHLORINATED POLYETHYLENE AND ACRYLIC RESIN

Studies On High Density Polyethylene/Polycarbonate Blend System Compatibilized With Low Density Polyethylene Grafted Diallyl Bisphenol A Ether

Polystyrene/High Density Polyethylene Blends Compatibilized by a Tri-Block Copolymer I. Properties and Morphology

Properties and morphologies of PVC/nylon terpolymer blends

Effect of Compatibilizer Content on the Tensile Properties and Fracture Toughness of High Density Polyethylene/Polystyrene Blends

Morphology and Thermal Properties of A Pc/Pe Blend with Reactive Compatibilization

The Compatibilization Effect of Ethylene/styrene Interpolymer on Polystyrene/polyethylene Blends

Compatibilizing modification of polyethersulfone/polycarbonate blend

Toughening Modification of Poly(vinyl Chloride)/ Α-Methylstyrene-acrylonitrile-butadiene-styrene Copolymer Blends Via Adding Chlorinated Polyethylene

Compatibilization by Sulfonate Ionomers in Polyblends with Thermotropic Liquid Crystalline Polymers

Morphology Development and Superior Mechanical Properties of Pp/Pa6/Sebs Ternary Blends Compatibilized by Using A Highly Efficient Multi-Phase Compatibilizer