Abstract:Ternary blends composed of matrix polymer poly(vinylidene fluoride) (PVDF) with different proportions of poly(methyl methacrylate) (PMMA)/poly(vinyl pyrrolidone) (PVP) blends were prepared by melt mixing. The miscibility, crystallization behavior, mechanical properties and hydrophilicity of the ternary blends have been investigated. The high compatibility of PVDF/PMMA/PVP ternary blends is induced by strong interactions between the carbonyl groups of the PMMA/PVP blend and the CF2 or CH2 group of PVDF. According to the Fourier transform infrared and wide-angle X-ray difffraction analyses, the introduction of PMMA does not change the crystalline state (i.e. a phase) of PVDF. By contrast, the addition of PVP in the blends favors the transformation of the crystalline state of PVDF from non-polar a to polar beta phase. Moreover, the crystallinity of the PVDF/PMMA/PVP ternary blends also decreases compared with neat PVDF. Through mechanical analysis, the elongation at break of the blends significantly increases to more than six times that of neat PVDF. This confirms that the addition of the PMMA/PVP blend enhances the toughness of PVDF. Besides, the hydrophilicity of PVDF is remarkably improved by blending with PMMA/PVP; in particular when the content of PVP reaches 30 wt%, the water contact angle displays its lowest value which decreased from 91.4 degrees to 51.0 degrees. Copyright (C) 2011 Society of Chemical Industry

A STUDY ON POLYVINYL-CHLORIDE) BLENDS WITH CHLORINATED POLYETHYLENE AND ACRYLIC RESIN

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

Mechanical and morphological properties of poly(vinyl chloride) and linear low‐density polyethylene polymer blends

Compatibility of PVC/EVA Blends and the Pervaporation of Their Blend Membranes for Benzene/cyclohexane Mixtures

Study of Compatibility, Morphology Structure and Mechanical Properties of Cpvc/Abs Blends

Effects of Chlorinated Polyethylene and Antimony Trioxide on Recycled Polyvinyl Chloride/acryl-Butadiene-styrene Blends: Flame Retardancy and Mechanical Properties

Relation Between Structure of CPE-g-VC Copolymer Resins and Their Properties

Studies on Mechanical and Rheological Properties of Poly(Vinyl Chloride) Modified with Elastomers and Rigid Organic Particles

A Multiblock Copolymer Compatibilizer for PVC/Polyolefin Blends

Preparation and Properties of in Situ Polymerization of Poly (vinyl Chloride)

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends

Study of Poly(vinyl Chloride)/acrylonitrile–styrene–acrylate Blends for Compatibility, Toughness, Thermal Stability and UV Irradiation Resistance

Ternary blends from biodegradable poly(L-lactic acid), poly(ε-caprolactone) and poly(vinyl acetate) with balanced properties

The Compatibility and Crystallization of the Mixtures of Poly (Tetrahydrofuran-B-methyl Methacrylate) Diblock Copolymer with Polyvinyl Chloride Homopolymer

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer

Phase Separation of Impact‐modified PVC/PMMA Blends under Melt‐blending Conditions

Preparation and Properties of PC/PLA Blend Toughened by ACR

Study of Compatibility Between Laminar Structure and Barrier Properties of Polyethylene/Modified Polyamide Blends

Modification of ABS/PVC Blend