Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Effects of Experimental Parameters on Elemental Analysis of Aluminum Alloy by Laser-Induced Breakdown Spectroscopy

Back pain in relation to musculoskeletal disorders in the jaw-face: A matched case–control study

Quantitative aluminum alloys analysis using laser-induced breakdown spectroscopy

Determination of film thickness and element content dependence for laser-induced breakdown spectroscopy (LIBS) of an AlZnO film

Research progress on the application of laser-induced breakdown spectroscopy in metal element detection

Improving the Laser-Induced Breakdown Spectroscopy Measurement Accuracy

Spectral Interference Elimination and Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy Assisted with Laser-Stimulated Absorption

Optical Scanning Analysis of Static Samples by Compact Laser Induced Breakdown Spectroscopy

Evaluation of Optical Depths and Self-Absorption of Strontium and Aluminum Emission Lines in Laser-Induced Breakdown Spectroscopy (LIBS)

Effect of laser wavelength on the quantitative analysis performance of indirect ablation LIBS for analyzing the metals in lubricating oil

Calibration-free Analysis of Immersed Metal Alloys Using Long-Pulse-duration Laser-Induced Breakdown Spectroscopy

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Influence of Laser Wavelength on Self-Absorption Effect in Laser-Induced Breakdown Spectroscopy

Studies of 3 beta-hydroxysteroid dehydrogenase genes in infants and children manifesting premature pubarche and increased adrenocorticotropin-stimulated delta 5-steroid levels.

Experimental Investigation of Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence for Trace Aluminum Detection in Steatite Ceramics.

Effect of single and double pulse laser-induced breakdown spectroscopy towards steel alloy in different gaseous media

Quantitative Analysis method of laser-induced breakdown spectroscopy based on temperature iterative correction of self-absorption effect

A Quantitative Analysis Method Assisted by Image Features in Laser-Induced Breakdown Spectroscopy.

A Method for Improving the Accuracy of Calibration-Free Laser-Induced Breakdown Spectroscopy by Exploiting Self-Absorption.

Microanalysis of molybdenum-copper stainless steel samples by picosecond laser-induced breakdown spectroscopy

Research on Fast Classification Based on Libs Technology and Principle Component Analyses