Abstract:The membrane extraction of copper ions was carried out using hydrophobic poly(propylene) (PP) hollow fiber membrane modules and kerosene solutions containing organic extractant. The influences of different extractant on the extraction yield, mass transfer performance and mass transfer mechanism were studied. Compared with 2-ethylhexyl phosphoric acid (2EHPA) and 2-methyl-5-sulpho benzaldoxime (2M5SB), di-(2-ethylhexyl)phosphoric acid (D2EHPA) extractant system with high distribution coefficient exhibited higher extraction yield of 99.7%. The extraction equilibrium time, the final extraction yield and the total mass transfer coefficient were independent of the flow rates of two phases. The extraction equilibrium time and the final extraction yield at different flow rates of two phases were 80 min and near 99.5%, respectively. A mass transfer model of a complexation reaction describing the overall mass transfer resistance was controlled by interfacial reactions rather than the aqueous and organic boundary layer which could explain the effect of flow rate on the final extraction yield and the total mass transfer coefficient. This model showed that the mass transfer resistance and mass transfer coefficient were independent Of Cu2+ when copper ion concentration was more than 0.06 g/L. However, when copper concentration was less than 0.06 g/l, the mass transfer resistance increased as Cu2+ concentration decreased, and the mass transfer coefficient decreased as Cu2+ concentration decreased. Extractant entrainment in the aqueous phase and membrane fouling were investigated primarily. It was found that the solvent entrainment could reduce to 10ppm much lower than 200ppm of the classic liquid-liquid extraction, and that the cleaning of contaminated membranes was not complete. However, it can be still concluded from this research that the membrane extraction in PP hollow fibre with D2EHPA extractant would be an effective and promising processing means for Cu2+ separation from aqueous solution. Copyright (c) 2005 John Wiley & Sons, Ltd.

Synergistic Extraction and Selective Removal of Cu2+ from Aqueous Solution Using Magnetic Nanoparticles Coated with Mixtures of Sodium Oleate and Saponified 2-Ethylhexyl Phosphonic Acid Mono-2-Ethylhexyl Ester

Synergistic Separation of Copper(ii) in Sulfate Solutions Through Outer-Sphere Coordination of Dinonylnaphthalene Disulfonic Acid

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Membrane Extraction For Separation Of Copper Cations From Acid Solution Using Polypropylene Hollow Fibre Membrane

In situ formed magnetic chitosan nanoparticles functionalized with polyethylenimine for effective U(VI) sorption

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Removal of Cu(II) Ions from Aqueous Solution by Magnetic Chitosan-Tripolyphosphate Modified Silica-Coated Adsorbent: Characterization and Mechanisms

High-efficient Technique to Simultaneous Removal of Cu(II), Ni(II) and Tannic Acid with Magnetic Resins: Complex Mechanism Behind Integrative Application

Selective removal of Cu(II) ions by magnetic mesoporous silica with surface ion-imprinted quaternized Schiff base coating

Preparation of Chitosan/Poly(Acrylic Acid) Magnetic Composite Microspheres and Applications in the Removal of Copper(Ii) Ions from Aqueous Solutions

Diverse Surface Chemistry of Cobalt Ferrite Nanoparticles to Optimize Copper(II) Removal from Aqueous Media

Efficient Removal of Cu(II) and Citrate Complexes by Combined Permanent Magnetic Resin and Its Mechanistic Insights

Efficient co-removal of copper and tetracycline from aqueous solution by using permanent magnetic cation exchange resin.

Application of Magnetic Ferrite Nanoparticles for Removal of Cu(II) from Copper-Ammonia Wastewater

PAMAM Grafted Magnetic Chitosan Particles by EDTA Core for Efficient Removal of Cu (II)

Magnetic Chitosan/sodium Alginate Gel Bead As a Novel Composite Adsorbent for Cu(II) Removal from Aqueous Solution

Improving Selective Separation of Cu(II) from Acidic Polymetallic Media with 2-Ethylhexyl 4-Pyridinecarboxylate Ester: Extraction Behaviors, Coordination Structure and Microscopic Mechanism

Magnetic Copper Hexacyanoferrate Core-shell Nanoparticles for Effective Cesium Removal from Aqueous Solution

Magnetic Separation of Heavy Metal Ions and Evaluation Based on Surface-Enhanced Raman Spectroscopy: Copper(ii) Ions As a Case Study.

Synthesis and adsorption performance of carboxyl-functionalized magnetic agarose gel microspheres for Cu(II) removal

Enhancement Mechanisms Behind Exclusive Removal and Selective Recovery of Copper from Salt Solutions with an Aminothiazole-Functionalized Adsorbent