Abstract:Owing to the enormous threat from anthropogenic contamination in water resources, the effective control of heavy-metal pollution has become increasingly important. In this study, the combination of permanent magnetic anion exchange resin (MAER) and magnetic cation exchange resin (MCER) was employed to efficient removal of Cu(II) and citrate acid (CA). The removal mechanisms were systematically investigated by batch adsorption experiments, and also certificated by species distribution calculation, kinetic tests and solid-phase characterizations. The presence of CA markedly inhibited the adsorption of Cu(II) onto MCER, while the co-existing Cu(II) was beneficial for CA uptake onto MAER. With the increase of Cu(II) concentrations, the adsorption amount of CA onto MAER gradually increased and reached a plateau, with promotion rates ranging of 24.4%-47.9%. For combined magnetic resins treatment, as the MAER dosage increased from 0 to 1.50 g/L, the removal efficiencies of CA and Cu(II) were enhanced from 1.1% and 33.2% to 98.8% and 99.1%, respectively. The anionic [Cu-CA] complexes (mainly CuL-and a small fraction of Cu2L22-) in bi-solutes system possessed higher affinity than free-CA species towards MAER, resulting in a mutual enhancement of Cu(II) and CA uptake. Both decomplexing-adsorption of Cu(II) from neutral Cu species (CuHL0) by MCER and direct complex-adsorption of anionic complex species (CuL-and Cu2L22-) by MAER were proposed as the mechanisms for synergetic removal of CA and Cu(II) in combined processes. Furthermore, nanoscale Cu powders were recovered from the desorption liquid by chemical reduction. The combined magnetic resins exhibited superior reusability over five repeated cycles, indicating their great potential in treatment of complexing heavy metal-organic acid wastewaters.

Application of Magnetic Ferrite Nanoparticles for Removal of Cu(II) from Copper-Ammonia Wastewater

The adsorption property investigation of tetraethylenepentamine functionalized nano-Fe3O4 polymer adsorbents on Cu(II) from wastewater

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Diverse Surface Chemistry of Cobalt Ferrite Nanoparticles to Optimize Copper(II) Removal from Aqueous Media

RAPID ELECTROPHORETIC SEPARATION OF LACTATE DEHYDROGENASE ISOENZYMES ON CELLULOSE ACETATE.

Fe_3O_4/Acrylate-based Magnetic Microparticles:Preparation and Adsorption Performance Toward Hg~(2+),Cu~(2+) and Ni~(2+)

Preparation of smart magnetic fluids and application in sewage treatment: Copper adsorption, kinetic and isotherm study

A Novel Adsorbent of Core-Shell Construction of Chitosan-Cellulose Magnetic Carbon Foam: Synthesis, Characterization and Application to Remove Copper in Wastewater

Highly Efficient Co-Removal of Heavy Metals in Wastewater from Chemical Oxygen Demand Testing Instrument by Cysteine-Functionalized Magnetic Nanoparticles

Magnetized sawdust for removal of Cu (II) and Ni (II) from aqueous solutions

Magnetic Nanoparticle Decorated Multi-Walled Carbon Nanotubes for Removing Copper Ammonia Complex from Water

Magnetic Copper Hexacyanoferrate Core-shell Nanoparticles for Effective Cesium Removal from Aqueous Solution

Fabrication of Amino-Functionalized CoFe2O4-SiO2 Magnetic Composites and Their Adsorption Performance for Removal of Heavy Metal Ions from Water

Synthesis and adsorption performance of carboxyl-functionalized magnetic agarose gel microspheres for Cu(II) removal

Removal of Metal Ions from Wastewater Using Co‐integrated Superparamagnetic Nanoparticles

Adsorption studies of Eu(III) ions from aqueous solutions by a synthesized copper magnetic ferrite nanoparticles as low-cost adsorbent

PAMAM Grafted Magnetic Chitosan Particles by EDTA Core for Efficient Removal of Cu (II)

Preparation Of Amino-Functionalized Cofe2o4@Sio2 Magnetic Nanocomposites For Potential Application In Absorbing Heavy Metal Ions

Efficient Removal of Cu(II) and Citrate Complexes by Combined Permanent Magnetic Resin and Its Mechanistic Insights

Adsorption of copper ions from aqueous media using montmorillonite-Al2O3 nano-adsorbent incorporated with Fe3O4 for facile separation

Synthesis of MnFe2O4@Mn-Co oxide core-shell nanoparticles and their excellent performance for heavy metal removal.