Abstract:Abstract5-Methyl-2-thiophenecarboxaldehyde (MTC)-derived Schiff base was immobilised over SBA-15 (TS-SBA-15) via a two-step modification procedure. Initially, (3-aminopropyl)triethoxysilane (APTES) was heterogenised over SBA-15 (NH2-SBA-15), and the Schiff base formation was followed by a reaction with MTC in hot methanol. X-ray diffraction and transmission electron microscopy showed that the SBA-15, NH2-SBA-15 and TS-SBA-15 materials had mesoscopically ordered, hexagonal symmetry and well-defined morphologies. 29Si magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy revealed a change in the silicon environment during modification. The N2 sorption experiments showed that the material has a large surface area (623 m2 g−1), acceptable pore diameter (6.5 nm) and reasonable pore volume (1.23 cm3 g−1) to accommodate the guest molecules inside the pore channels. Organic functionalisation was determined successfully by Fourier transform infrared and 13C cross-polarisation magic-angle spinning NMR spectroscopy. The optimal condition for the removal of Cr(III), Pb(II) and Zn(II) from water was explored by varying the parameters, such as pH, stirring time, initial concentration and amount of adsorbent. The results suggested that TS-SBA-15 can achieve the adsorption maximum within 6 h at pH 6.5. The adsorbent exhibited moderate-to-good adsorption ability towards the three metal ions under these experimental conditions. The selective adsorption performance of TS-SBA-15 from binary mixture was examined by keeping equal concentrations of metal ions in the mixture. TS-SBA-15 was more selective towards Cr(III) ions from both the binary and ternary mixtures at pH 6.5. The effect of the metal ion concentration over mole adsorption selectivity in the ternary mixture was examined by doubling the concentration of at least one metal ion in the mixture. The result was compared with the ternary mixture containing equal concentrations of metal ions. The reusability test showed that TS-SBA-15 can be recycled for at least six consecutive cycles without losing its adsorption ability.Graphical Abstract

Selective removal of Cu(II) ions by magnetic mesoporous silica with surface ion-imprinted quaternized Schiff base coating

Ion-imprinted magnetic adsorbents for the selective capture of Cu(II) and their cascade application as heterogeneous recyclable catalysts for Ullmann and Glaser coupling reactions

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Magnetic Chitosan/sodium Alginate Gel Bead As a Novel Composite Adsorbent for Cu(II) Removal from Aqueous Solution

Methylthiazole Schiff base functionalized SBA-15 for high-performance Pb(II) capture and separation

Highly Efficient Sorption of U(VI) from Aqueous Solution Using Amino/amine-Functionalized Magnetic Mesoporous Silica Nanospheres

Multi-principles analysis of Cu(II) adsorption in water on magnetic microspheres and modified Chitosan

Synthesis of pyridyl Schiff base functionalized SBA-15 mesoporous silica for the removal of Cu(II) and Pb(II) from aqueous solution

Synthesis of functionalized mesoporous silica and its application for Cu(II) removal

Selective Adsorption Behavior and Mechanism for Cd(II) in Aqueous Solution with a Recoverable Magnetie-Surface Ion-Imprinted Polymer

Preparation of SBA-15 mesoporous silica grafted with bis-salicylaldehyde Schiff base for uptake of Pb(II) and Cu(II) from water

Synthesis of cubic mesoporous silica SBA16 functionalized with carboxylic acid in a one-pot process for efficient removal of wastewater containing Cu 2+ : Adsorption Isotherms, Kinetics, and Thermodynamics

Selective Adsorption of Pb(II) by a Silica Gel-Immobilized Schiff Base

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Bi-functionalized MCM-41 for heavy metal ions removal: synthesis, enhanced performance and mechanism study

Concentration-dependant selective removal of Cr(III), Pb(II) and Zn(II) from aqueous mixtures using 5-methyl-2-thiophenecarboxaldehyde Schiff base-immobilised SBA-15

Synthesis and adsorption performance of carboxyl-functionalized magnetic agarose gel microspheres for Cu(II) removal

Comparison of adsorption of U(VI) by magnetic MCM-41, MCM-48 and SBA-15 mesoporous silicas

Synthesis of Mesoporous Silica Adsorbent Modified with Mercapto–Amine Groups for Selective Adsorption of Cu2+ Ion from Aqueous Solution

Adsorption of Cu(II)–EDTA Chelates on Tri-Ammonium-functionalized Mesoporous Silica from Aqueous Solution

Effective removal of Cu(II) from water by three-dimensional composite microspheres based on chitosan/sodium alginate/silicon dioxide: Adsorption performance and mechanism