Abstract:To treat dyeing and printing industrial wastewater with zero liquid discharge, developing a straightforward technique for fabricating membranes with sufficient alkaline and salt resistance is crucial. This study presents a facile n-hexane post-treatment method to enhance the ability of polysulfone (PSf) membranes to fractionate textile wastewater. The optimal membrane exhibits minimal salt rejections, with only 5.1 % for NaCl and 9.8 % for Na2SO4. Additionally, it demonstrates exceptional dye rejection rates, reaching 99.87 % for Direct Red 23 and 99.81 % for Congo Red while maintaining high-water permeance (∼52 L m−2h−1 bar−1) at the alkaline environment (pH = 13) and high salt (30 g/L). Furthermore, a combined diafiltration process was devised for the separation of a mixture containing Congo Red and Na2SO4. This process achieved an impressive desalination efficiency of 98 % while ensuring a remarkable dye recovery of 99.8 %. The outstanding performance can be attributed to the favorable solvency capability of n-hexane, which was determined based on the analysis of Hansen solubility parameters. Through a two-minute solvent treatment of PSf membranes, the flexibility of the polymer chains within the membranes was enhanced, leading to a denser structural arrangement. This arrangement resulted in the formation of highly selective membranes. The extent of densification is influenced by several factors, such as solvent type, immersion duration, and polymer concentrations. These variables directly affect the level of solvation and chain rearrangement that occurs during the process. This study underscores the potential significance of solvent treatment as a post-treatment step in membrane fabrication, demonstrating its utility as a tool for fine-tuning separation performance in applications that involve dye/salt mixtures, and highlighting its importance in the field of membrane technology.

A feasible post-treatment of drying and rewetting for preparation of high-flux pluronic F127/polyethersulfone nanofiltration membranes

Fabrication of High-Flux PTFE Hollow Fiber Membranes Through Nonionic Surfactant Infiltration Coupled with Mussel-Inspired Chemistry Coating

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Combing three-dimensional water channels and ultra-thin skin layer enable high flux and stability of loose polyimide/SiO<sub>2 </sub>nanofiltration membranes at low operating pressure via one step in-situ modification

PTFE-assisted immobilization of Pluronic F127 in PVDF hollow fiber membranes with enhanced hydrophilicity through nonsolvent-thermally induced phase separation method

Fabrication of novel anti-fouling poly(m-phenylene isophthalamide) ultrafiltration membrane modified with Pluronic F127 via coupling phase inversion and surface segregation

Enhancing thin-film composite polyethersulfone hollow fiber membranes through alkali-induced interfacial polymerization modification for effective separation of monovalent/divalent salts

Development of hydrophilic PES membranes using F127 and HKUST-1 based on the RTIPS method: Mitigate the permeability-selectivity trade-off

Crosslinking and fluorination reinforced PTFE nanofibrous membrane with excellent amphiphobic performance for low-scaling membrane distillations

Development of antifouling nanofiltration membranes for separation of dye/salt mixture through incorporation of novel polyelectrolyte-decorated silica

Fabrication of anti-fouling polyester nanofiltration membrane for dye desalination

Construction of PES membranes using NH2-MIL-125 and Pluronic F127 via RTIPS method toward elevated ultrafiltration, antifouling and self-cleaning performance

Porous organic polymer nanosheets doped multistage water channel ultrafiltration membrane: Accelerated phase inversion process and in-situ covalent crosslinking strategy

Preparation of Super-Hydrophilic Polyphenylsulfone Nanofiber Membranes for Water Treatment

Facile membrane preparation strategy to reinforce permeability of polyethersulfone (PES) micro-ultrafiltration membrane for drinking water treatment

F-SiO2 Eables PLA-based Superhydrophobic Nanofiber Membrane with Highly Efficient Membrane Distillation

Novel thin-film nanocomposite membranes with crosslinked polyvinyl alcohol interlayer for Perfluorinated Compounds (PFCs) removal

Fabrication and characterization of a novel polyvinyl alcohol-graphene oxide-sodium alginate nanocomposite hydrogel blended PES nanofiltration membrane for improved water purification

Amphiphobic electrospun PTFE nanofibrous membranes for robust membrane distillation process

Superhydrophobic nanofiber membranes with 3D-network reinforced pore structure for membrane distillation

Facile post-treatment of PSf membranes with hexane for fractionation and concentration of alkaline textile wastewater