Abstract:In order to develop multifunctional quaternary ammonium salts and explore their advantages as modifiers for wastewater treatment, castor oil-based quaternary ammonium salts were synthesised and subsequently used as modifiers for attapulgite treatment. The structures of untreated and treated attapulgite were compared by Fourier transform infrared spectra and X-ray diffraction. The mechanism of modification was speculated. Various factors such as the amount of modified attapulgite, temperature and pH were also investigated in the batch experiments on the removal rates of acetone and phenol from wastewaters. The synthesis conditions were set as follows: the reaction temperature was 80 °C, the reaction time was 8 h, the molar ratio of castor oil to N,N-dimethyl-1,3-propanediamine was 1:5, the catalyst was 6% NaOH and the product yield was about 64.72%. The grafting rate of the castor oil-based quaternary ammonium salt was about 99.6% when the amount of modifier was 0.69 g per 5 g of attapulgite, the ultrasound treatment time was 11 min and the pH was 5. The quaternary ammonium salt was only associated with the surface of attapulgite and did not change the rod-like crystal structure of the silicate. The modified attapulgite is much more fibrous and exhibits a good distribution of crystal bundles. The removal rates were found to be less favourable under strongly acidic and strongly alkaline conditions. Under suitable conditions, for 50 mL industrial wastewaters (phenol: 100–160 mg/L; acetone: 680–800 mg/L), the amount of modified attapulgite was 1 g, the temperature was 80 °C and the pH was 7, and the maximum removal rates of acetone and phenol after 80 min reached about 65.71% and 78.72%, respectively, which were higher than those of ATP.

Sorptive Removal of Β-Blocker Propranolol from Aqueous Solution by Modified Attapulgite: Effect Factors and Sorption Mechanisms

Application of Klebsiella oxytoca Biomass in the Biosorptive Treatment of PAH-Bearing Wastewater: Effect of PAH Hydrophobicity and Implications for Prediction

The Triple Mechanisms of Atenolol Adsorption on Ca-Montmorillonite: Implication in Pharmaceutical Wastewater Treatment

Highly efficient removal of tannic acid from aqueous solution by chitosan-coated attapulgite

Promoting adsorption of organic pollutants via tailoring surface physicochemical properties of biomass-derived carbon-attapulgite

Adsorption of Antibiotics in Aqueous Solution with Modified Attapulgite

Magnetic Powdery Acrylic Polymer with Ultrahigh Adsorption Capacity for Atenolol Removal: Preparation, Characterization, and Microscopic Adsorption Mechanism

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Photocatalytic degradation of propranolol hydrochloride in aqueous medium employing bentonite-TiO 2 nanocomposites

Mechanism of Β-Blocker Biodegradation by Wastewater Microorganisms

Investigation of 3-aminopropyltriethoxysilane modifying attapulgite for Congo red removal: Mechanisms and site energy distribution

Removal of Cr(III) Using Humic Acid–Modified Attapulgite

Adsorption of Individual and Mixtures of β-Blockers and Copper in Soils and Sediments

Adsorptive removal of propranolol under fixed-bed column using magnetic tyre char: Effects of wastewater effluent organic matter and ball milling

Synthesis of Castor Oil-Based Quaternary Ammonium Salt and Modification of Attapulgite for Treating Industrial Wastewaters

Adsorption Properties and Mechanism of Attapulgite to Graphene Oxide in Aqueous Solution

Preparation and Characterization of Mercapto-Functionalized Calcined Attapulgite and Its Removal of Pb (II) and Cd (II) Solution

Selective removal of lead from aqueous solutions by ethylenediamine-modified attapulgite

Adsorption of Doxycycline on Attapulgite

Adsorption of the Total Organic Acid by Attapulgit

Adsorption Properties of Polyethersulfone-Modified Attapulgite Hybrid Microspheres for Bisphenol A and Sulfamethoxazole