Abstract:In TiO2-based perovskite solar cells (PSC), the preparation of the CH3NH3PbI3/TiO2 composite layer is very important, since the morphology of the perovskite adsorbed onto the surface of the TiO2 nanoparticles has decisive significance for the absorption of the incident sunlight and separation of the generated carrier. The traditional two-step spin-coating method for the deposition of CH3NH3PbI3 into the porous mesoporous TiO2 layer usually suffers from filling block problems. In this study, the PbO-TiO2 mesoporous layer was prepared with various ratios of Pb:Ti in the raw materials. Morphological, optical, and element analysis of the prepared thin films indicated that Pb was gradually mixed into the TiO2 mesoporous layer with the increased Pb:Ti ratios. The element distribution characteristics of the optimal thin films showed that the distribution of Pb was uniform throughout the whole TiO2 thin film, which indicates the successful mixing of Pb into the TiO2 electrode layer. Combined with dip coating, the PbO-TiO2 mesoporous layer was prepared into a CH3NH3PbI3/TiO2 composite layer and subsequently to a solar cell device. The prepared solar cell shows a short-circuit photocurrent density of 16.4 mA/cm2, an open-circuit voltage of 900 mV, a fill factor of 61%, and a power conversion efficiency (PCE) of 9.00%. The PCE of the PSC is promoted by nearly 25% when compared with that prepared with the traditional method. The proposed preparation method that combines TiO2 nanoparticle electrode with a mixing and dip coating provides a new effective way to improve the deposition of perovskite into the mesoporous TiO2 layer, which is very helpful for the fabrication of high-efficiency and low-cost PSC.

Preparation of porous titania film and its application in solar cells.

Hybrid poly (3-hexylthiophene)/titanium dioxide nanorods material for solar cell applications

Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells.

Improving poly(3-hexylthiophene)-TiO2 heterojunction solar cells by connecting polypyrrole to the TiO2 nanorods

Preparation and photovoltaic properties of the composite based on porous In2S3 films and PCPDTBT

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

The photovoltaic efficiency of the fabrication of copolymer P3HT:PCBM on different thickness nano-anatase titania as solar cell

Preparation and photovoltaic properties of the composite based on porous In 2 S 3 films and PCPDTBT

Photovoltaic Cells with Tio2 Nanocrystals and Conjugated Polymer Composites

The Properties of the CH3NH3PbI3/TiO2 Composite Layer Prepared from PbO-TiO2 Mesoporous Layer under Air Ambience

Hybrid inverted organic photovoltaic cells based on nanoporous TiO2 films and organic small molecules

Nanostructured Mesoporous Titanium Dioxide Thin Film Prepared by Sol-Gel Method for Dye-Sensitized Solar Cell

Study on the Fabrication of PEDOT:PSS/Si Hybrid Solar Cells Incorporated with F4TCNQ and VTMO

Direct imprinting of ordered and dense TiO2 nanopore arrays by using a soft template for photovoltaic applications

Formation of Titania Nanoarrays by Hydrothermal Reaction and Their Application in Photovoltaic Cells

Fabrication and Application of Highly Ordered Porous TiO_2 Films

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Synthesis of A Hierarchically Meso-Macroporous Tio2 Film Based on Uv Light-Induced in Situ Polymerization: Application to Dye-Sensitized Solar Cells

In-situ Fabrication of Dual Porous Titanium Dioxide Films As Anode for Carbon Cathode Based Perovskite Solar Cell

Surface-initiated Growth of Conjugated Polymers for Functionalization of Electronically Active Nanoporous Networks: Synthesis, Structure and Optical Properties