Abstract:Due to the low transport resistance, mullite hollow fiber (HF) could be regarded as a promising support for preparation of NaA zeolite membranes. However, insufficient coverage and undesired seed penetration often occur in the seeding step of the mullite support due to the rough surfaces with ultra-large macropores (2-4 μm). This leads to poor intergrowth of the membrane layer. To solve this issue, cationic polyacrylamide (CPAM) was employed to modify the chemical and electrostatic properties of the mullite HF surface, where the electrostatic attraction between the surface and seed crystals could significantly promote the coating effect. In the seeding, the original seeds (3.2 μm) were mixed with the ball-milled seeds (0.3 μm) to improve the seed coverage, i.e., the original seed was used to block the macropores on the support surface to prevent the penetration of small seeds, while the decked ball-milled seed was used to provide sufficient active sites to induce the intergrowth of the zeolite crystals. The effects of the concentration of CPAM, mixed mass ratio of seeds, and seed concentration on the preparation of NaA zeolite membranes were systematically examined, where the separation performances were characterized by pervaporation (PV) dehydration of 90 %(mass) ethanol/water mixtures at 75 °C. The results indicated that under a CPAM concentration of 0.7 %(mass), an equivalent mass ratio of mixed seeds in a seed concentration of 1.0 %(mass), the prepared mullite HF supported NaA zeolite membrane yielded the best PV performance, where the permeation flux and separation factor corresponded to 5.45 kg·m −2 ·h −1 and 10000, respectively, being sufficient for industrial applications. Graphical abstract Download: Download high-res image (212KB) Download: Download full-size image

Functional Defect-Patching of A Zeolite Membrane for the Dehydration of Acetic Acid by Pervaporation

A study on the pervaporation of water–acetic acid mixtures through ZSM-5 zeolite membranes

Recovering Ethyl Acetate from Aqueous Solution Using P(VDF-co-HFP) Membrane Based Pervaporation

High Performance Zeolite Lta Pervaporation Membranes on Ceramic Hollow Fibers by Dipcoating-Wiping Seed Deposition

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

Silane-Modified Naa Zeolite/Paas Hybrid Pervaporation Membranes for the Dehydration of Ethanol

Preparation of zeolite MFI membranes on defective macroporous alumina supports by a novel wetting–rubbing seeding method: Role of wetting agent

Silane-modified NaA/PAAs hybrid membranes for ethanol dehydration by pervaporation

The preparation of zeolite NaA membranes on the inner surface of hollow fiber supports

Ultrasonic Treatment of Polyacrylic Acid Sodium/Naa Zeolite Hybrid Membranes for the Pervaporation Dehydration of Ethanol

Preparation of Stable Multilayer PDMS Composite Pervaporation Membrane Incorporated with In-Situ Transformed Metal Organic Frameworks for Enhanced Butanol Recovery

Preparation of zeolite MFI membranes on alumina hollow fibers with high flux for pervaporation

Zeolite NaA membranes supported on alumina hollow fibers: Effect of support resistances on pervaporation performance

Zeolite Mfi Membranes for Separation of Ethanol/Water Mixture

CPAM-assisted synthesis of NaA zeolite membrane on macroporous mullite hollow fiber for ethanol dehydration by pervaporation

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Pervaporation Dehydration Mechanism and Performance of High-Aluminum ZSM-5 Zeolite Membranes for Organic Solvents

Improved hydrothermal stability of LTA zeolite membrane by forming an acrylamide protective layer for pervaporation dehydration of water-rich acrylamide and ethanol solutions

High performance zeolite NaA membranes synthesized on the inner surface of zeolite/PES–PI blend composite hollow fibers

Preparation and Surface Hydrophilic Modification of MOR Zeolite Membrane Potentially Appling for Acetic Acid Aldol Condensation Reaction System

Functionalized MOF-Derived Nanoporous Carbon as Compatible Nanofiller to Fabricate Defect-Free PDMS-Based Mixed Matrix Pervaporation Membranes