Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Connection Between Liquid Distribution and Gas-Liquid Mass Transfer in Monolithic Bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

CFD simulation of effects of the configuration of gas distributors on gas–liquid flow and mixing in a bubble column

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Effect of gas distributor on gas–liquid dispersion and mass transfer characteristics in stirred tank

Gas-liquid mass transfer in a gas–liquid-solid three-phase moving bed

The gas–liquid mass transfer and pressure drop behaviors of the gas–liquid–liquid three‐phase flow in micro‐packed beds

Dispersion behavior of liquid–liquid and gas–liquid two‐phase flow in micro‐packed beds

Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds

Liquid–liquid mass transfer and pressure drop behavior in micro‐packed beds with different shaped packings

Gas-Liquid Interfacial Area and Mass Transfer Coefficient in a Three-phase Circulating Fluidized Bed

Hydrodynamics and Mass Transfer Performance of Gas–liquid Microflow in Viscous Liquids

Effects of internals and distributors on the distribution and growth of bubbles in the conventional gas–solid fluidized bed

Mass transfer characteristic in the formation stage of gas-liquid segmented flow in microchannel

Liquid dispersion in gas-liquid-solid circulating fluidized beds

Mass transfer performance of gas-liquid segmented flow in microchannels