Abstract:The anodic polarization response of magnesium alloy AZ31 was first characterized during exposure to aerated 0.1 M NaCl solutions with millimolar additions of NaVO3, Na3PO4, Na2HPO4, NaF and various pairings to assess their ability to inhibit corrosion kinetics and retard localized corrosion. Each of the candidate inhibitors reduced the corrosion rate of the alloy to some degree. A Na3PO4–NaVO3 pair produced a good inhibiting effect decreasing the corrosion rate to about 10−7 A/cm2, which was two orders of magnitude lower than the uninhibited control case. A Bliss Independence assessment indicated that this inhibitor pair acted synergistically. A Na2HPO4–NaVO3 pair reduced the corrosion rate to 10−6 A/cm2 but was not assessed to be acting synergistically. The NaVO3–NaF pair did not reduce the corrosion rate significantly compared to the control case and was an antagonistic pairing. SEM imaging showed film formation due to exposure, which appears to be the origin of the observed inhibition. The resistance to localized corrosion was assessed as the difference in the breakdown potential and the corrosion potential, with larger values indicating a lower probability of localized corrosion during free corrosion exposures. The effects of the inhibitors on this characteristic were mixed, but each of the inhibitor pairs yielded potential differences in excess of 100 mV. A conceptual conversion coating process based on a mixture of vanadate and phosphate compounds were demonstrated. A fluoride-bearing formulation produced coatings whose total impedance was increased by a factor of two compared to an uncoated control. A fluoride-free formulation produced coatings whose corrosion resistance was increased by more than a factor of three.

Effects of Five Additives on Electrochemical Corrosion Behaviours of AZ91D Magnesium Alloy in Sodium Chloride Solution

Improved electrochemical performance of trivalent-chrome coating on Al 6063 alloy via urea and thiourea addition

Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy

A Combined Inhibiting Effect of Sodium Alginate and Sodium Phosphate on the Corrosion of Magnesium Alloy Az31 in Nacl Solution

Corrosion Properties of AZ31 Magnesium Alloy and Protective Effects of Chemical Conversion Layers and Anodized Coatings

Investigation of Az91d Magnesium Alloy Corrosion Behavior under Thin Electrolyte Layer Using Nondestructive Electrochemical Techniques

Inhibitive effect of sodium carbonate on corrosion of AZ31 magnesium alloy in NaCl solution

Corrosion resistance and molecular dynamics behavior of the MAO/SAM composite coatings on magnesium alloy

Insight into synergistic corrosion inhibition of sodium benzoate and sodium silicate on LZ91 magnesium alloy: Experimental and theoretical calculations

Effect of the Sodium Silicate Inhibitor on the Corrosion Protection of AZ31 Magnesium Alloy

Corrosion behavior of anodized AZ91D magnesium alloy in NaCl aqueous solution

Effect of ZrSiO4 Concentration on the Microstructure and Corrosion Resistance of MAO Coatings Formed on AZ91 Magnesium Alloy

Using Community–Academic Partnerships and a Comprehensive School-Based Program to Decrease Health Disparities in Activity in School-Aged Children

Comparison of the Corrosion Behaviour in 5% NaCl Solution of Mg Alloys NZ30K and AZ91D

The Effect of Vanadate, Phosphate, Fluoride Compounds on the Aqueous Corrosion of Magnesium Alloy AZ31 in Dilute Chloride Solutions

Enhancing corrosion resistance of magnesium alloys via combining green chicory extracts and metal cations as organic-inorganic composite inhibitor

Effects of micro-alloying Ag on microstructure, mechanical properties and corrosion behavior of extruded Mg-2Zn-0.2Ca-xAg alloys

Corrosion Behavior of AZ91D Magnesium Alloy in Acidic Solution of NaCl

Optimization of the Experimental Parameters Affecting the Corrosion Behavior for Mg–Y–Zn–Mn Alloy via Response Surface Methodology

Corrosion Inhibition of AZ31-xLi (x = 4, 8, 12) Magnesium Alloys in Sodium Chloride Solutions by Aqueous Molybdate

Electrochemical Behavior of ZE41 Magnesium Alloy under Simulated Atmospheric Corrosion