Abstract:A common-rail system is widely used in electronically controlled diesel engines and has been used in Euro IV diesel engine development, as its consistency between the fuel injection quantities of the injectors can be controlled accurately. In Chinese home-made common-rail systems, the bottleneck is mainly caused by the mechanical manufacturing, which results in variation in the fuel injection quantity of different injectors. In spite of the low-class hardware limit, this paper introduces a software method to correct the inconsistency between the fuel injection quantities of the injectors over the whole range during which the engine is running. First, the main factor affecting the inconsistency between the fuel injection quantities of the injectors is determined on the basis of a series of experiments. Second, an optimization algorithm based on the start of injection is proposed to compensate for the difference between the injectors. Finally, the algorithm is verified on an EFS 8246 fuel-pump-testing platform and further on a YC6A diesel engine. The experiments demonstrate that the correction based on the start of injection not only can reduce the inconsistency between the fuel injection quantities of the injectors but also can improve both the idling control and the emission performance for the electronically controlled diesel engine. This paper also provides a successful example for improving the consistency between the fuel injection quantities from cylinder to cylinder in an electronically controlled diesel engine by this software optimization method.

Control Strategy of Diesel Engine Based on Software and Hardware Reusability

Study of Control Strategy of Double Potentiometer Pedal for Electronic Controlled Diesel Engine

Development of Idle Control Strategy for Diesel Engine with Unit Pump System(UPS)

Software Design of Electronically Control Unit Pump Diesel Engine ECU

Development of Vehicle Speed Processing and Vehicle Speed Limit Control Strategy for Diesel Engine Electronic Control System

Development of Hybrid Powertrain Control Software

Development of a New Hardware-in-loop Simulation Platform for GD-1 Diesel Engine Based on CAN and Multithread Technologies

Development of Integrated Rule-Based Control and Equivalent Consumption Minimization Strategy for HEV Energy Management

Study of Multiple-Injection Coordinate Control Strategy for GD-1 Diesel Engine

Start-of-injection-based software optimization for consistency between the cylinders in common-rail diesel engines

Control Strategy for a Full Hybrid Vehicle with Single Motor

An Optimal-Pressure Control Strategy for Hydrostatic Wheel Loader.

EGR Control Strategy of Electronically Controlled Diesel Engine Based on Dual Close Loop

The Control Strategy for a New Full Hybrid Powertrain Structure

Experiment-Based Software Optimization for Cylinders Consistency in Electronic Unit Pump Diesel Engines

Research on Injection Control Strategy for High Pressure Common Rail Diesel Engine

The Researche of Electrically Controlled System of Marine Diesel Engine

Development of High-Pressure Common-Rail-Injection Control System Based on VxD-PC Technology

Study on Egr Control Strategy for Vehicle Diesel Engine Based on Experiment

A Study on the Development Scheme for High-pressure Common-rail Electronic Control Unit of Diesel Engine

Optimization of Control Strategy for the Hybrid Control Unit of 4WD Hybrid Electric Vehicle