Abstract:The rigid pile composite foundation is widely used in highway projects in soft soil area as it can effectively increase the bearing capacity and stability of the foundation. While the research on the behavior and failure mode of rigid pile composite foundation under embankment is not enough, instability failure of rigid pile composite foundation often occurs in practical projects. This paper presents a centrifuge model test to investigate the load transfer mechanism, settlement characteristic and failure mode of rigid pile composite foundation under embankment. The test results show that: the soil displacement of different region in rigid pile composite foundation was different, obvious vertical displacement occurred in the soil under the center of embankment and the horizontal displacement was very small in this region; both vertical and horizontal displacement occurred in the soil under the shoulder of embankment; and obvious horizontal displacement occurred in the soil under the slope toe of embankment; moreover, ground heave also occurred near the slope toe of embankment. The soil displacement in rigid pile composite foundation had a large influence on the stress characteristic and failure mode of rigid piles, the compressive failure and bending failure would probably occur for the piles under the center and shoulder of the embankment, respectively, and the tension-bending failure would probably occur for the piles under the slope toe of embankment. The different failure modes of piles at different regions should be considered in the design of rigid pile composite foundation under embankment. The test results can be used to improve the design method for rigid pile composite foundation under embankment in practical projects.

Centrifuge modeling of failure behavior of pile-reinforced slope

Centrifuge modeling of cohesive soil slopes reinforced by stabilizing piles

Integrated Analysis of a Coupled Mechanism for the Failure Processes of Pile-Reinforced Slopes

Pile-Reinforcement Behavior of Cohesive Soil Slopes: Numerical Modeling and Centrifuge Testing

Centrifuge Model Tests on Laterally Loaded Piles in Sand

Centrifuge Model Tests on Pile-Reinforced Slopes Subjected to Drawdown

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Centrifuge Modeling of Monotonic and Cyclic Lateral Behavior of Monopiles in Sand

Progressive Failure Behavior of Pile-Reinforced Clay Slopes under Surface Load Conditions

Centrifugal Model Tests on Working Behavior of Composite Foundation Reinforced by Rigid Piles with Caps Under Embankment

Behavior of Soil Slopes Reinforced with Composite-Structural Piles

Centrifuge Model Test Study on Pile Reinforcement Behavior of Cohesive Soil Slopes under Earthquake Conditions

Centrifuge Modeling of Dynamic Behavior of Pile-Reinforced Slopes During Earthquakes

Centrifuge Modeling Of Progressive Failure Of Soil Slope

Pile Reinforcement Mechanism of Soil Slopes

Centrifuge Modeling of the Progressive Failure of A Soil Slope under Cyclic Loading Conditions

Centrifuge Modeling of the Pile Foundation Reinforcement on Slopes Subjected to Uneven Settlement

Centrifugal Model Test On Behavior Of Strip Footing On Soil Nail-Reinforced Cohesive Soil Slopes

Centrifuge Study on Behavior of Rigid Pile Composite Foundation under Embankment in Soft Soil

Centrifuge Model Tests on Excavation-Induced Failure of Slopes

Centrifuge Modeling of Rainfall-Induced Failure Process of Soil Slope