Abstract:As one of the significant objects of remote sensing monitoring, landslides not only lead to huge economic losses, but also result in catastrophic environmental damage and human casualties. In the past few decades, piles are widely accepted and successfully applied in slope stabilization. Through numerical calculation based on limit equilibrium method, pile reinforcement effects on cohesive and cohesionless soil slopes are studied in this paper. The potential influencing factors are systematically analyzed, including cohesion, friction angle, pile truncation length, slope gradient, and soft band. A correlation was developed to predict the safety factor as a quadratic function of pile truncation length. The results show that pile reinforcement effect was related to the slope gradient and not to cohesion or friction angle. As the slope gradient increases, the pile reinforcement effect on the cohesive soil decreases, while that of the cohesionless soil increases. On the whole, the pile reinforcement effect of cohesive soil slope is better than that of cohesionless soil slope. For the slope with a soft band, the pile reinforcement effect gradually increases as the strength of soft band decreases. During the pile truncation process, the change in safety factor for slopes with a soft band can be divided into three phases: pile control phase, pile-soft band control phase, and soft band control phase. Piles are more suitable for reinforcing cohesive soil slopes containing soft bands, which can effectively improve the slope stability. The research results can provide reference for the rational use of piles and the reduction of geotechnical engineering hazards related to landslides.

Pile-Reinforcement Behavior of Cohesive Soil Slopes: Numerical Modeling and Centrifuge Testing

Pile Reinforcement Mechanism of Soil Slopes

Centrifuge Modeling of Monotonic and Cyclic Lateral Behavior of Monopiles in Sand

Centrifuge modeling of cohesive soil slopes reinforced by stabilizing piles

Centrifuge modeling of failure behavior of pile-reinforced slope

Centrifuge Model Tests on Laterally Loaded Piles in Sand

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Behavior of Soil Slopes Reinforced with Composite-Structural Piles

Centrifuge Model Test Study on Pile Reinforcement Behavior of Cohesive Soil Slopes under Earthquake Conditions

Pile Reinforcement Behavior and Mechanism in a Soil Slope under Drawdown Conditions

A Simplified Planar Model for Geosynthetics Reinforced Composite Foundation Subjected to Vertical Load

Assessment of Cohesive Soil Landslide Driving Forces Exerted on Piles Considering Soil Arching Effects

Integrated Analysis of a Coupled Mechanism for the Failure Processes of Pile-Reinforced Slopes

Centrifugal Model Tests on Working Behavior of Composite Foundation Reinforced by Rigid Piles with Caps Under Embankment

Simplified Evaluation on the Stability Level of Pile-Reinforced Slopes

Centrifuge Model Tests on Pile-Reinforced Slopes Subjected to Drawdown

Numerical analysis of pile reinforcement effect on cohesive and cohesionless soil slopes for assisting remote sensing

Centrifuge Modeling of Dynamic Behavior of Pile-Reinforced Slopes During Earthquakes

Centrifuge Modeling of the Pile Foundation Reinforcement on Slopes Subjected to Uneven Settlement

Seismic performance of a nonhomogeneous slope reinforced by anchored piles using centrifuge tests

Progressive Failure Behavior of Pile-Reinforced Clay Slopes under Surface Load Conditions