Abstract:The use of the seismic piezocone test (SCPTU) in geotechnical site investigation offers direct field measurement on stratigraphy and soil behaviour. Compared with some traditional investigation methods such as drilling, sampling and field inspecting method or laboratory test procedures, SCPTU can greatly accelerate the field work and hereby reduce corresponding operation cost. This paper presents the methods review to predict the constrained modulus (M) and to measure small strain shear modulus (Gmax) from SCPTU data. The capacity of current interpretation methods to predict the constrained modulus (M) was evaluated for Lixia River lagoonal soils. Several sites in Lixia River area were selected for this study. In each site, SCPTU tests were performed and the soundings of cone tip resistance (qc), sleeve friction (fs), pore pressure (u2), and shear wave velocity (Vs) were recorded. The predicted M values obtained from the SCPTU interpretation methods were compared with the reference values determined from the laboratory consolidation tests. Results of this study showed that the Sanglerat method was able to predict M better than the other methods. Two new correlations were also developed to predict M from the corrected cone tip resistance (qt) and the net cone tip resistance (qn). Small strain shear stiffness can be tentatively estimated in the absence of direct measurement of shear wave velocity. The reliable result was obtained using an association between Gmax, qt and pore pressure parameter Bq. Compared to field downhole wave velocity measurements, SCPTU can lead to a more reliable measurement of maximum stiffness profile with depth. The stress–strain–strength response of the clays was evaluated by the maximum shear stiffness and undrained shear strength.

Determination of undrained shear strength in clayey soils for subway construction sites

Determination of undrained shear strength using piezocone penetration test in clayey soil for bridge foundation

Determination of Undrained Shear Strength of Clayey Soil in Ningbo Based on CPTU

Evaluation of Undrained Shear Strength of Clay Using the CPTU Pore Pressure Method

A New Empirical Model for the Undrained Shear Strength of Undisturbed Marine Fine-Grained Soil Based on Piezocone Penetration Tests

Determination of confined compression modulus of soft clay using piezocone penetration tests

Field Evaluation of Undrained Shear Strength from Piezocone Penetration Tests in Soft Marine Clay

Estimation of Undrained Shear Strength of Overconsolidated Clay Using a Maximum Excess Pore Pressure Method Based on Piezocone Penetration Test (CPTU)

A Novel Method for Estimating the Undrained Shear Strength of Marine Soil Based on CPTU Tests

In-situ Evaluation of Undrained Shear Strength from Seismic Piezocone Penetration Tests for Soft Marine Clay in Jiangsu, China

Determination of coefficient of earth pressure at rest(K_0) using seismic piezocone tests

Shear strength evaluation method for soil-bentonite cutoff wall backfill based on CPTU test

Geotechnical Characteristic Assessments of Floodplain Soils Using SCPTU Data in Nanjing, China

Estimation Of Embankment Settlements Over Soft Marine Soil From Cptu Data

Piezocone Penetration Test-Based Site Characterisation of Chong-Qi Bridge Project, China

Determination of Undrained Shear Strength of Clayey Soils by SPT Value

A Comprehensive Investigation on Onshore and Underwater Soils Using CPTU and DMT Tests: a Case Study in Yangtze River at Jiangsu, China

DETERMINATION OF COMPRESSIVE MODULUS FOR FOUNDATION SOILS FROM THE PIEZOCONE PENETRATION TEST(CPTU)

Prediction of Embankment Settlements over Marine Clay Using Piezocone Penetration Tests

Estimating P-Y Curves for Clays by CPTU Method: Framework and Empirical Study

Field Evaluation of Deformation Characteristics of A Lacustrine Clay Deposit Using Seismic Piezocone Tests