Abstract:The use of the seismic piezocone test (SCPTU) in geotechnical site investigation offers direct field measurement on stratigraphy and soil behaviour. Compared with some traditional investigation methods such as drilling, sampling and field inspecting method or laboratory test procedures, SCPTU can greatly accelerate the field work and hereby reduce corresponding operation cost. This paper presents the methods review to predict the constrained modulus (M) and to measure small strain shear modulus (Gmax) from SCPTU data. The capacity of current interpretation methods to predict the constrained modulus (M) was evaluated for Lixia River lagoonal soils. Several sites in Lixia River area were selected for this study. In each site, SCPTU tests were performed and the soundings of cone tip resistance (qc), sleeve friction (fs), pore pressure (u2), and shear wave velocity (Vs) were recorded. The predicted M values obtained from the SCPTU interpretation methods were compared with the reference values determined from the laboratory consolidation tests. Results of this study showed that the Sanglerat method was able to predict M better than the other methods. Two new correlations were also developed to predict M from the corrected cone tip resistance (qt) and the net cone tip resistance (qn). Small strain shear stiffness can be tentatively estimated in the absence of direct measurement of shear wave velocity. The reliable result was obtained using an association between Gmax, qt and pore pressure parameter Bq. Compared to field downhole wave velocity measurements, SCPTU can lead to a more reliable measurement of maximum stiffness profile with depth. The stress–strain–strength response of the clays was evaluated by the maximum shear stiffness and undrained shear strength.

Prediction of Embankment Settlements over Marine Clay Using Piezocone Penetration Tests

Estimation Of Embankment Settlements Over Soft Marine Soil From Cptu Data

Determination of confined compression modulus of soft clay using piezocone penetration tests

Approach on the Engineering Properties of Lianyungang Marine Clay from Piezocone Penetration Tests

Settlement Prediction of Soft Ground by Modified Layerwise Summation Method Based on Piezocone Tests

Field Evaluation of Deformation Characteristics of A Lacustrine Clay Deposit Using Seismic Piezocone Tests

Determination of Consolidation Coefficient for Expressway on Soft Ground from the Piezocone Penetration Test

Reliability Assessment of CPTU-based Pile Capacity Predictions in Soft Clay Deposits

Field Evaluation of Undrained Shear Strength from Piezocone Penetration Tests in Soft Marine Clay

Strength interpretation parameter of piezoncone penetration test for soft clay in offshore area of Hangzhou Bay

A New Empirical Model for the Undrained Shear Strength of Undisturbed Marine Fine-Grained Soil Based on Piezocone Penetration Tests

Analysis Of Consolidation Processing Of Piezocone Penetration Test In Cutoff Wall

Prediction of the Coefficient of Consolidation of Soil Via the Hyperbolic Fitting Method During Piezocone Dissipation Test

Evaluating Strength Parameters of Pearl River Offshore Sediments Based on Piezocone Penetration Test

Cavity expansion-based interpretation of piezocone penetration test (CPTu) data in clays

Evaluation of Pile Bearing Capacity from Piezocone Penetration Test Data in Soft Jiangsu Quaternary Clay Deposits

Piezocone Penetration Test-Based Site Characterisation of Chong-Qi Bridge Project, China

Evaluation of Geotechnical Parameters of a Lagoonal Clay Deposit in Jiangsu Lixia River Area of China by Seismic Piezocone Tests

Application of the Piezocone Penetration Testing to Assess Flow Characteristics of Marine Clay

Estimating P-Y Curves for Clays by CPTU Method: Framework and Empirical Study

Consolidation Parameters Interpretation of Cptu Dissipation Data Based on Strain Path Theory for Soft Jiangsu Quaternary Clays