Research on New Signal Processing Method of Mechanically Dithered Ring Laser Gyro

张庆华,胡绍民,卢广锋
DOI: https://doi.org/10.13741/j.cnki.11-1879/o4.2010.01.011
2010-01-01
Abstract:The common method to remove the dither signal of the Mechanically Dithered Ring Laser Gyro(MDRLG) at present is to design a Finite Impulse Response(FIR) low pass digital filter.The order and the delay time of the FIR filter will be much high to achieve well performance,which limits the use of the MDRLG in fast tracking inertial navigation system(LINS).A new signal processing method based on correlate filter is proposed.The basic theory is analyzed.The simulation is realized based on Labview.Tests show that dither signal can be attenuated 41dB by this method.The residual dither signal and high frequency noise can be removed by 22-order low pass filter.In room temperature and static state,null drift stability tests are performed.The test results indicate that a hundred second root-mean-square(σ100) of measured null drift value tested with dither stripper is three times of that tested with 50-order FIR low pass filter.The σ100 tested with dither stripper plus 22-order FIR low-pass filter is only 0.001°/h larger than that of 50-order FIR low pass filter,but the delay time can be reduced from 4.9ms to 2.1ms.
What problem does this paper attempt to address?