Abstract:A high-speed emittance measurement system installed at the J-PARC RF negative hydrogen (H - ) ion source test stand can construct emittance diagrams of the beam of a specific frequency component. The driving 2 MHz RF power produces small amplitude oscillating components at 2 MHz and at higher harmonic frequencies in the total H - ion beam detected by a Faraday installed downstream of the emittance measurement system. Magnitudes of oscillating component at 2 MHz and 4 MHz frequencies become appreciable as the slits of the emittance measurement system separate the H - ion beam into the position/angle resolved phase space elements. The reconstructed emittance diagrams of H - ion beams for the operation condition with continuous supply of Cs realizing large H - ion current to total extraction current ratios indicate that 2 MHz and 4 MHz frequency oscillating beam components propagate surrounding the center DC beam. Both 2 MHz and 4 MHz oscillating beam components comprise two to three beam particle groups in the phase space. The DC component of the H - ion beam exhibit a single peak in the angular distribution. Meanwhile, oscillating components often take the minima where the DC H - ion beam takes the maximum in the angular distribution diagram. Thus, the regions that produce large amplitude oscillations of the H - ion beam are considered located at the circumference of the beam extraction aperture. One possible explanation for observing larger amplitude beam oscillation can be the enhanced H - ion surface production at the plasma facing the wall of the beam extraction aperture. The operation without the Cs delivery to the source increased electron current coextracted with H - ions and changed the structure of the beam emittance diagram. In the direction perpendicular to the magnetic fields created by a magnetic filter and electron suppression magnets, the peak of the 4 MHz oscillating beam components appeared at the center of the DC beam. This observation suggests the extraction of H - ions formed in the central region by the volume production process near the internal RF antenna. Mechanisms that can excite and diminish the beam fluctuation amplitudes of the extracted H - ion beam are discussed.

Emittance Improvement Efforts On The 15-20 Ma Dc H- Multicusp Source

Experimental Study for 15-20 Ma Dc H- Multicusp Source.

High-Power Ion Beam Characteristics of a Magnetic Multi-Pole Line-Cusp Ion Source for the HL-2A Tokomak

Experimental Development On The 18 Ma, H- Multi-Cusp Ion Source At China Institute Of Atomic Energy

H- cusp source development for 100 MeV compact cyclotron at China Institute of Atomic Energy

Development of Series H(-) Multicusp Ion Source at China Institute of Atomic Energy.

Design And Machining Of The 15-20ma H-Cusp Source

Upgrading of Ion Source for NEC Compact AMS

Measurement of Emittance at CSNS Ion Source Without Analyzing Magnet

Development of A Compact Filament-Discharge Multi-Cusp H- Ion Source

Upgrade of the Extraction System of Permanent Magnet Electron Cyclotron Resonance Ion Source

Effect due to Cs injection upon current oscillation of the beam extracted from the J-PARC negative hydrogen ion source

Hˉ Cusp Source Development for 100 MeV Compact Cyclotron at CIAE

A New Measurement Of Electron Beam Emittance With Cerenkov Radiation "Double Imaging" Method

mA beam acceleration efforts on 100 MeV H− cyclotron at CIAE ☆

Optimization of transverse emittance for RF-driven negative hydrogen ion source developed at China Spallation Neutron Source

Numerical Investigation for High Intensity H− Beam Injection to a 100 MeV Compact Cyclotron

&Lt;title>improved Electron Beam for CAEP FIR-FEL</title>

Practical 2.45-Ghz Microwave-Driven Cs-free H − Ion Source Developed at Peking University

An Emittance Measurement Device for a Space-Charge Dominated Electron Beam

Matching from H- Multicusp Source to Central Region of A 100 Mev Compact Cyclotron for High Current Injection