Abstract:Summary form only given. Recently, the state-of-the-art of lithium-niobate-on-insulator (LNOI) has been reviewed [1]. In analogy to silicon-on-insulator (SOI), the new material platform for integrated optics with wafers of up to 3” diameter enables the fabrication of optical waveguides with small cross-sections and small bending radii due to the high refractive index contrast. As a consequence, ultra-compact photonic integrated devices such as ring resonators and photonic crystal structures have been developed.Here we demonstrate also Er-doped LNOI, which might become an ideal material for nano-optical amplifiers and lasers. Doping is achieved by pre-diffusion of Er into the upper LN wafer before bonding [2], and the resulting Er concentration is about 1020 cm-3. Ridges of different width w = (2.5 - 10) μm were fabricated on these LNOI substrates (LN thickness of 960 nm) using precision diamond-blade dicing which results in smooth side walls of the fabricated waveguides. We present results of a first investigation of the erbium centers using Raman and fluorescence spectroscopy of planar and ridge waveguides in Er:LNOI.Characterization of the waveguides was performed using Raman and fluorescence spectroscopy. Spectral scans were obtained using a scanning confocal microscope and a 488 nm laser. Besides line broadening that may be attributed to internal strain in the bonded layer, analysis of the Raman spectrum shows no significant difference between the waveguide and the bulk material. However, the erbium emission of the 4H15/2 and 4S3/2 to the 4I15/2 contains several differences in the intensity ratios indicating that the relative transition probabilities are different for the smart cut waveguide. While Raman intensity has a linear relationship with pump power, the intensity of the Er emission starts saturating at pump levels of only a few mW. To investigate fluorescence of the 4I13/2 - 4I15/2 transition inside the formed ridges, a fiber coupled lase- with a wavelength of 980 nm is used for pumping. The rhs of the figure above shows a diced ridge and the green fluorescence that can be observed when the ridge is pumped at 980 nm. An example of the IR fluorescence is given on the right of the above figure using 40 mW of pump light, with the spectrum of an erbium doped fiber as a reference. The emission is broadened and maxima are shifted to longer wavelengths, which may be attributed to defects induced by implantation, re-absorption of fluorescence light, and contributions by amplified spontaneous emission due to the waveguiding effect.

Carbon Ion Implanted Nd:Mgo:Linbo3 Optical Channel Waveguides: an Intermediate Step Between Light and Heavy Ion Implanted Waveguides

Low-Dose Ion Implanted Active Waveguides in Nd3+ Doped Near-Stoichiometric Lithium Niobate: Promising Candidates for Near Infrared Integrated Laser

Monolithic Integration of a Lithium Niobate Microresonator with a Free-Standing Waveguide Using Femtosecond Laser Assisted Ion Beam Writing.

Planar waveguides in neodymium-doped calcium niobium gallium garnet crystals produced by proton implantation

Lithium–Niobate Channel Waveguide for the Realization of Long-Period Gratings

Mg-Ion Indiffusion of Lithium-Niobate Single-Crystal Fiber

MgO:LiNbO3 Planar Waveguide Formed by MeV O2+ Implantation and Its Annealing Characteristics

Formation of Optical Waveguide and Annealing Behaviour of LiNbO 3 Implanted by 3.0-Mev Nickel Ions

Helium-implanted optical planar waveguides in Nd3+-doped phosphate glass

Helium-Implanted Optical Planar Waveguides in Nd <sup>3+</sup> -Doped Phosphate Glass

Preparation and characteristics of the O3+-ion-implanted and femtosecond laser-ablated waveguide in the high-gain Nd3+-doped laser glass

Channel Waveguides in Lithium Niobate and Lithium Tantalate

Planar waveguide nanolaser configured by dye-doped hybrid nanofilm on substrate

Optical ridge waveguides in Nd3+‐doped fluorophosphate glasses fabricated by carbon ion implantation and femtosecond laser ablation

Near-infrared Carbon-Implanted Waveguides in Tb3+-doped Aluminum Borosilicate Glasses

High-power Continuous-Wave Optical Waveguiding in a Silica Micro/nanofibre.

Germanium-On-Silicon Nitride Waveguides for Mid-Infrared Integrated Photonics

High-performance femtosecond-laser microfabricated lattice-like-cladding waveguides in Er 3+ and MgO co-doped LiNbO 3 crystals for multi-wavelength guidance and luminescence

10-W-level CW waveguiding in an optical micro/nanofiber

Fluorescence in planar and ridge waveguides fabricated in Erbium-Doped lithium-niobate-on-insulator (Er:LNOI)

Nonlinear waveguides by femtosecond laser writing of lithium triborate crystals