Abstract:It is very important to maintain an optimum inside environment during the different stages of aquatic animals growth for modeling thermal behavior of aquaculture greenhouse. A mechanistic model was developed to describe the thermal behavior of a shading turtle greenhouse system with polystyrene foamed plastic envelope. Energy balance equations have been written considering the effects of conduction, convection, radiation, evaporation and ventilation. Numerical computations have been performed for special days in the month of January 2012, under the climatic conditions of Hangzhou in Eastern China. The governing equations are numerically solved using Matlab 7.0 software to predict the inside and outside surface temperature of the envelope, room temperature, relative humidity, and water temperature. At the same time, on-site measurements were taken at a turtle-breeding facility in Hangzhou for comparisons with predictions. Results showed that the average absolute errors of air temperature, water temperature, and relative humidity were 1.3, 0.32℃ and 3%, respectively. The results also showed that the internal air temperature and water temperature could maintain a relatively stable state by using two sets of 2.7 kW ground-source heat pumps for the turtle greenhouse heating (about 540 m2), a suitable thermal environment for the turtles growth. Model simulations were used to investigate the effects of the greenhouse on the air and water temperature and to examine the heatfluxes. The results suggest that the daily mean temperature is 5.8℃, the solar radiation is 132 W/m2, the room temperature maintains 35℃, and the water temperature maintains 30℃ when the heat pump provides 40 W/m2in January near Eastern China-Hangzhou. An examination of the heatfluxes suggests that thermal radiation and underground heat conduction are major mechanisms of heat loss for the greenhouse covers and water. About 44.5% of heat loss was caused by underground heat exchange, about 43% by built envelopment heat exchange, and about 12.5% was by air leakage. Reducing these heatfluxes will help conserve and utilize energy. Moreover, the model was deemed to be a useful tool for exploring the performance of heating greenhouse systems under different scenarios, such as different cover materials, sizes and climates.

Comprehensive Simulation for Microclimate Environment with Computational Fluid Dynamics Methods and Its Application for Optimal Sensor Placement in Small-Scale Greenhouse

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Thermal simulation and test in closed-shading turtle greenhouse

3-D Steady Simulation of Temperature Pattern Inside Single Plastic Greenhouse Using CFD

Preliminary study on temperature pattern in China solar greenhouse using computational fluid dynamics

Numerical Analysis of the Natural Ventilation in A Tunnel Greenhouse at High Temperature and Low-wind-speeds

Modeling and Simulation of the Greenhouse Environment with Matlab Simulink

A microenvironment prediction model for Chinese solar greenhouses based on the bond graph approach.

Numerical modelling of temperature variations in a Chinese solar greenhouse

OPTIMIZATION OF VENT CONFIGURATION DURING VENTILATION FOR DEHUMIDIFICATION PURPOSE USING COMPUTATIONAL FLUID DYNAMICS

Numerical Simulation on Thermal Environment of Heated Glass Greenhouse Based on Porous Medium

Design and experiment of Internet-of-Things cooling system in glass greenhouse based on computational fluid dynamics simulation

Influence of 2D and 3D Simulations on Temperature Predictions for Solar Greenhouse

Numerical simulation of microclimate around residential buildings

Improving indoor air flow and temperature prediction with local measurements based on CFD-EnKF data assimilation

Measured And Predicted Temperatures Inside Chinese Solar Greenhouses

Numerical analysis of outdoor thermal environment around buildings

Testing and Analysis on the Spatial and Temporal Distribution of Light Intensity and CO2 Concentration in Solar Greenhouse

Design and simulation of a greenhouse in a computational environment (ANSYS/FLUENT) and an automatic control system in a LABVIEW environment

Spatial temperature distribution and ground thermal storage in the plastic greenhouse: An experimental and modeling study

Optimized Design of Hot Air Pipe in Greenhouse Based on CFD Technique