Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

The Injection Efficiency Measurement and Analysis for Central Region Model Cyclotron.

Ion Source and Low Energy Injection Line for a Central Region Model Cyclotron.

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Central Region Design for A 10 Mev Internal Ion Source Cyclotron

Physics design on the axial injection system and the central region of the l00MeV high intensity cyclone

THE STUDY AND DESIGN OF SPIRAL INFLECTOR AND CENTRAL REGION FOR CYCIAE-100 CYCLOTRON

Numerical Investigation for High Intensity H− Beam Injection to a 100 MeV Compact Cyclotron

Investigation and quantitative simulation of beam physics for 230 MeV SC cyclotron under construction at CIAE

The injection line and central region design of cyciae-70

Matching from H- Multicusp Source to Central Region of A 100 Mev Compact Cyclotron for High Current Injection

Technical Study For Inflector And Central Region Of High Intensity Central Region Model Cyclotron

Beam Test of 10 MeV High Intensity Cyclotron

Concept design of axial injection system of CYCIAE type cyclotrons

Comprehensive test stand for high-intensity cyclotron development

Study and Design of the Axial Injection System at SFC

Ion Source And Injection Line For High Intensity Medical Cyclotron

H- cusp source development for 100 MeV compact cyclotron at China Institute of Atomic Energy

GENERAL ENGINEERING CONSIDERATION FOR THE 100MEV CYCLOTRON

Development of Specially Designed Small Doublet for Compact Cyclotron Beam Injection

The design and construction of a pulsed beam generation system based on high intensity cyclotron

Operation experience of CYCIAE30 injector