Abstract:In order to offer higher average brightness and more stable photon beam, top-up injection mode is scheduled for daily operation in SSRF. Several critical beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely and reliably, and few interlock logics need to be added into machine protection system with top-up mode. Several hardware and software optimizations of beam instrumentation for this purpose will be introduced in this paper. OVERVIEW Shanghai Synchrotron Radiation Facility (SSRF) is a third generation light source, which located at Shanghai, P.R. China. Since December 2012, SSRF has operated in top-up mode for user experiments, which was a milestone of SSRF in facility performance improvements. The topup injections are made continuously at the time interval of about 10 minutes. Each injection cycle takes about 10 seconds and the bunch change uniformity of the 500 bunch train is better than 95%. For the top-up operation, several beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely. Some extra interlock logics were added into machine protection system. This paper will introduce the details of hardware and software optimizations of beam instrumentation for the purpose above. FILLING PATTERN Bunch charge uniformity control is very important for the top-up operation. The quality mainly depends on the precision of bunch charge & filling pattern measurement. This measurement can be realized by direct sampling BPM pickup signal [1-3] or synchrotron radiation signal [4]. Due to easy configuration and good linearity button, BPM pickups and PXI waveform digitizer based solution have been adopted [5].

Conceptual design of injection system for Hefei Light source (HLS) upgrade project

Conceptual design of 5 MW-NBI injector for HL-2 M tokamak

An Upgrade Proposal of Injection Bump System for HLS

Physical Design of Full Energy Injection System in HLS

Feasibility Study of Full-energy Injection of HLS Injection Bump System

Upgrading the Injector System of Beijing HI-13 Tandem Accelerator

The upgrade project of Hefei Light Source (HLS)

Conceptual Design of Hefei Advanced Light Source (hals) Injection System

Simulation of hefei advanced light source ( hals ) injection system *

The Upgraded Scheme of Hefei Light Source

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Development of AMS High Resolution Injector System

The upgrade of hefei light source(HLS) transport line

Beam Loading Effects and Intensity Limit in the Injection Process of Hefei Light Source

Multiturn Injection Design and Optimization for XiPAF-Upgrading Synchrotron

Construction And Commissioning Of Hls Injection Bump System

The optimization for the conceptual design of a 300 MeV proton synchrotron

Conceptual design of linear injector for SSC of HIRFL

Beam dynamic design of a high intensity injector for proton linac

Design and beam dynamics simulation for the photoinjector of shanghai soft X-ray free electron laser test facility

Adjustment Of The Phase Ii Upgraded Program Of The Hefei Electron Storage Ring