Abstract:In order to offer higher average brightness and more stable photon beam, top-up injection mode is scheduled for daily operation in SSRF. Several critical beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely and reliably, and few interlock logics need to be added into machine protection system with top-up mode. Several hardware and software optimizations of beam instrumentation for this purpose will be introduced in this paper. OVERVIEW Shanghai Synchrotron Radiation Facility (SSRF) is a third generation light source, which located at Shanghai, P.R. China. Since December 2012, SSRF has operated in top-up mode for user experiments, which was a milestone of SSRF in facility performance improvements. The topup injections are made continuously at the time interval of about 10 minutes. Each injection cycle takes about 10 seconds and the bunch change uniformity of the 500 bunch train is better than 95%. For the top-up operation, several beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely. Some extra interlock logics were added into machine protection system. This paper will introduce the details of hardware and software optimizations of beam instrumentation for the purpose above. FILLING PATTERN Bunch charge uniformity control is very important for the top-up operation. The quality mainly depends on the precision of bunch charge & filling pattern measurement. This measurement can be realized by direct sampling BPM pickup signal [1-3] or synchrotron radiation signal [4]. Due to easy configuration and good linearity button, BPM pickups and PXI waveform digitizer based solution have been adopted [5].

An Upgrade Proposal of Injection Bump System for HLS

Conceptual design of injection system for Hefei Light source (HLS) upgrade project

Feasibility Study of Full-energy Injection of HLS Injection Bump System

Physical Design of Full Energy Injection System in HLS

Construction And Commissioning Of Hls Injection Bump System

The upgrade project of Hefei Light Source (HLS)

The Upgraded Scheme of Hefei Light Source

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Physics design of phase and energy adjustment for heavy ion beam of the same mass with two-charge state on BISOL

The upgrade of hefei light source(HLS) transport line

Upgrading the Injector System of Beijing HI-13 Tandem Accelerator

Study of injection scheme using pulsed quadrupole for HLS storage ring

Research and development for injection system of HLS storage ring in NSRL Phase Ⅱ Project

Simulation of hefei advanced light source ( hals ) injection system *

Analysis of Some Phenomena in the Commissioning of the Storage Ring in the Phase Ⅱ Project of the HLS

Conceptual Design of Hefei Advanced Light Source (hals) Injection System

Beam Loading Effects and Intensity Limit in the Injection Process of Hefei Light Source

Lattice design and beam lifetime study for HLS storage ring upgrade project

Adjustment Of The Phase Ii Upgraded Program Of The Hefei Electron Storage Ring

Experiment Result of the Turn-by-turn System and Its Application in HLS

Early Beam Injection Scheme for the Fermilab Booster: A Path for Intensity Upgrade