Abstract:YBCO bulks with submicron Y2BaCuO5 particles have been prepared under oxygen partial pressures of 0.21atm and 1atm, respectively, by the powder melting process (PMP). The microstructures, oxygen contents and critical current densities of the samples have been investigated. The results showed that the sample grown under P(O2) = 1 atm contained Y2BaCuO5 particles with a little bigger average size and had a slightly higher density of stacking faults than the one prepared under P(O2) = 0.21 atm. Oxygen content measurements indicated that the as-grown sample under P(O2) = 1 atm had a higher oxygen content. After post-annealing in flowing oxygen, the oxygen content of the P(O2) = 1 atm sample was still higher than that of the P(O2) = 0.21 atm sample. They were examined to be 6.94 and 6.88 with X-ray diffraction for the two oxygenated samples, respectively. Magnetization measurements have been performed on the two types of oxygenated samples and critical current densities (Jc) have been calculated based on the extended Bean critical state model. The P(O2) = 0.21 atm sample exhibits Jc values of 5.47×105 A/cm2 and 2.22×104 A/cm2 in 1 T magnetic field at 20K and 77K, respectively. The P(O2) = 1 atm sample, meanwhile, has Jc values of 9.46×105 A/cm2 and 1.47×104 A/cm2 in 1 T magnetic field at 20K and 77K, respectively. Moreover, at 20K, the Jc of the P(O2) = 1 atm sample is higher than that of the P(O2) = 0.21 atm sample in an applied magnetic field up to 5 T. At 77K, however, the Jc of the P(O2) = 1 atm sample drops more quickly than that of the P(O2) = 0.21 atm sample. The mechanisms of the different microstructures, oxygen contents and magnetic field dependence behaviors of Jc for the two kinds of samples have been discussed.

Critical Current Density and Microstructure of Ndba2cu3o7 Single Crystal

In-Plane and Out-of-Plane Thermal Conductivities of a Large Single Crystal of NdBa2Cu3O7−x Prepared by the Top-Seeded Solution-Growth Method

Crystal growth and characterization of the quasi-one-dimensional compound BaCoO3

NdBa2Cu3O7−δ stoichiometry control (at pO2=0.21 atm) and enhancement of superconductivity

The Influence of Post-Growth Thermal Treatments on the Critical Current Density of Tsmg Ybco Bulk Superconductors

Crystal growth of NdBa2(Cu1−xNix)3O7−δ solid solutions by top-seeded solution growth for HTS device and tape applications

Crystal Growth of A High-T-C Smbco Superconductor in 1 Atm Oxygen Pressure

95 K NdBCO Single Crystal Grown in Air by Controlling Liquid Composition

GROWTH AND HEAT TRANSPORT OF Nd2-xCexCuO4SINGLE CRYSTALS USING FLUX AND FLOATING ZONE METHOD

Inhomogeneity of Magnesium Diboride Structure and its Effect on Critical Current Density

Growth of Nd-123 Single Crystals with Enhanced Superconducting Properties

Improved J(C) Properties And Microstructure In Na-Doped Mtg-Ybco Crystals

Structural and Magnetic Chemistry of NdBaCo2O5+δ

Effects on Air-Processed Ndbco Superconductor Bulks when Adding A Ba-Rich Nd2ba4cu2o9 Phase

Influence of Oxygen Partial Pressure on the Microstructures and Critical Current Densities of PMP-Processed YBCO Bulks with Submicron Y2BaCuO5 Particles

Flux Growth of Multiferroic Cu3Nb2O8 Single Crystals

Solidification Dynamics and Microstructure Evolution in Nanocrystalline Cobalt

Superconducting Rebco/Me-Ndbco/Mgo Multilayer Structure by the Liquid Phase Epitaxy Process (re = Y, Sm and Nd; Me Ni, Mg)

Observation of Intrinsic Josephson Effects in Tetragonally Synthesized Single-Crystalline Ndba2cu3o6.65 Films Grown by Tri-Phase Epitaxy

Thermal Stability of NdBCO/YBCO/MgO Thin Film Seeds

Microstructure, Magnetization and Dc Transport Properties of Mtg-Yba1.8 Na0.2cu3oy Crystal