Abstract:To reconcile the contradiction between piezoelectric property and its temperature stability, the preparation of composite piezoceramics using multiple components has become an emerging direction. Herein, (K,Na)NbO 3 -based piezoceramics are adopted to prepare high-performance laminated composite ceramics inspired by the lamination composite strategy, and sintered in the reducing atmosphere to meet the development of multilayer piezoelectric actuators with base metal internal electrodes. By adjusting the composition ratio, a high inverse piezoelectric coefficient d 33 * of 1065 pm/V (@ 2 kV/mm) is obtained in the two-component composite ceramics, which fluctuated less than ± 6% in the range of 25–160 °C. In the three-component composite ceramics, a higher d 33 * value of 1326 pm/V (@ 2 kV/mm) is achieved and maintained > 90% until 150 °C. The electric-field-induced strain performances of laminated composite ceramics significantly exceed those of their basic components, which is related to the piezoresponse gain provided by the internal interfaces. The excellent temperature stabilities come from the more diffused phase transition temperature range formed by the complementation of multiple components. The combination of ultrahigh strain performance, high temperature stability, and good fatigue resistance, together with sintering in the reducing atmosphere, constitutes an important step to promote the application of (K,Na)NbO 3 -based multilayer piezoelectric actuators.

High Damping SiO_2-Coated LiNbO_3 Particles Reinforced ZL102 Composites and Piezo-damping Features

New type of piezo-damping aluminum matrix composites with ZnO:Al-coated LiNbO3 particles

Effects of ZnO coating on the damping and tensile properties of LiNbO3 particle-reinforced aluminum composite

Effect of Domain Structure on the Damping Properties of LiNbO3/Al Composites

Enhanced Piezoelectric Properties and Thermal Stability of LiNbO3-modified PNN–PZT Ceramics

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Damping properties of epoxy-embedded piezoelectric composites

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

High-damping and Conducting Epoxy Nanocomposite Using Both Zinc Oxide Particles and Carbon Nanofibers

Enhanced Piezoelectric and Ferroelectric Properties of Nb2O5 Modified Lead Zirconate Titanate‐Based Composites

Characterization of the Damping and Mechanical Properties of a Novel (znsno3/pvdf)@ppy Nanofibers/ep Composite

Enhanced Piezoelectric and Mechanical Properties of Zno Whiskers and Sb2o3 Co-Modified Lead Zirconate Titanate Composites

Excellent strain properties in (K,Na)NbO 3 -based piezoceramics induced by lamination composite strategy

High piezoelectricity and stable output in BaHfO3 and (Bi0.5Na0.5)ZrO3 modified (K0.5Na0.5)(Nb0.96Sb0.04)O3 textured ceramics

Effect of lithium carbonate on the sintering, microstructure, and functional properties of sol–gel‐derived Ba0.85Ca0.15Zr0.1Ti0.9O3 piezoceramics

Damping Capacity of the Al Matrix Composite Reinforced with SiC Particle and TiNi Fiber

High-Performance 0-3 Type Niobate-Based Lead-Free Piezoelectric Composite Ceramics with ZnO Inclusions.

Comparison of Li+-doping sources on properties of ZnO piezoelectric films

High-stability Quinary Lead-Based Piezoelectric Ceramics with High Piezoelectric Properties

Enhanced piezoelectric performance of composite sol-gel thick films evaluated using piezoresponse force microscopy.

Electrical Properties of Ni-particle-dispersed Alkaline Niobate Composites Sintered in a Protective Atmosphere