Abstract:Surface acoustic waves (SAWs) are of practical importance across several fields. Particularly, a wide range of SAW devices is available, which are based on the stacking piezoelectric layered hetero-structures. As such, efficient and stable algorithm of analyzing electromechanical coupling factor (K2) should be of specific interest, inspiring a variety of piezoelectric layered structures. Motivated by the above considerations, this paper exploits the performance of Sc43% AlN57%/ZnO/diamond piezoelectric hetero-structures using matrix and polynomial methods. Consequently, dispersion curves, the electromechanical coupling factor and profiles of Rayleigh waves are calculated, in which the properties of hexagonal intermediate ZnO layer are varied. Here, $$ (0001) - [10\bar{1}0]{\text{ZnO}} $$ or $$ (11\bar{2}0) - [0001]{\text{ZnO}} $$ directions of the middle layer were integrated with Sc43% AlN57%/diamond to be a composite hetero-structure with a larger K2 of SAW. Accordingly, a commercial ZnO specimen was characterized by scanning electron microscopy (SEM) as well as Raman and XRD spectroscopy to determine its available crystallographic directions and the C-axis hexagonal character. Comparing with conventional AlN/diamond hetero-structures, the inclusion of ZnO as the intermediate layer provides with an excellent electromechanical coupling factor which significantly improves the $$ (11\bar{2}0) - [0001] $$ structure. However, comparing with the ZnO/diamond hetero-structure, a high phase velocity (Vph) was observed. Therefore, the development of a well-balanced structure that maximizes the values of Vph and K2 is systematically challenging. Moreover, it was found that initial stresses have a significant effect on the Rayleigh wave velocities. Fundamental A0 Lamb mode can be generated in piezoelectric hetero-structures when the properties of substrate remain very low relative to the film. Numerical results obtained in this paper can provide a deeper insight into the nature of the Rayleigh wave behaviors in piezoelectric hetero-structures, involving a ZnO intermediate layer.

New type of piezo-damping aluminum matrix composites with ZnO:Al-coated LiNbO3 particles

Effects of ZnO coating on the damping and tensile properties of LiNbO3 particle-reinforced aluminum composite

High Damping SiO_2-Coated LiNbO_3 Particles Reinforced ZL102 Composites and Piezo-damping Features

Effect of Domain Structure on the Damping Properties of LiNbO3/Al Composites

A Study on the Damping Capacities of Mg–Zn–Y-Based Alloys with Lamellar Long Period Stacking Ordered Phases by Preparation Process

Characterization of the Damping and Mechanical Properties of a Novel (znsno3/pvdf)@ppy Nanofibers/ep Composite

Influence of a Piezoelectric ZnO Intermediate Layer on Rayleigh Waves Propagating in Sc 43% AlN 57% /zno/diamond Hetero-Structures Subjected to Uniaxial Stress

Damping properties of epoxy-embedded piezoelectric composites

Ultra‐Damping Composites Enhanced by Yolk–Shell Piezoelectric Damping Mechanism

High-damping and Conducting Epoxy Nanocomposite Using Both Zinc Oxide Particles and Carbon Nanofibers

Enhanced Piezoelectric Properties and Thermal Stability in the (K0.5Na0.5)NbO3:ZnO Lead‐Free Piezoelectric Composites

Enhanced Piezoelectric and Ferroelectric Properties of Nb2O5 Modified Lead Zirconate Titanate‐Based Composites

Damping Performance of Zn-Al/Pearlite Porous Composites under Vibration Circumstance

Mechanical Reinforcement and Piezoelectric Properties of Nanocomposites Embedded with ZnO Nanowhiskers

Damping Mechanisms in Alumina Borate Whisker-Reinforced-aluminum Matrix Composites with or Without SnO2 Coatings

Effects of ZnO Nanoneedles Addition on the Mechanical and Piezoelectric Properties of Hard PZT-based Composites

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

Dielectric properties and thermal conductivity of epoxy resin composite modified by Zn/ZnO/Al 2 O 3 core–shell particles

The Effect of Nanosized Pb Liquid Phase on the Damping Behavior in Aluminum Matrix Composite Based on the 2024Al-Bapbo 3 System

Damping and mechanical behavior of graphene nanoplatelets reinforced Al-30Zn alloy matrix bioinspired laminated composites by two steps flake powder metallurgy

Piezoelectric damping composite with graphene aerogel as conductive phase