Abstract:In this study, porous lead zirconate titanate (PZT) ceramics with porosity ranging from 46.4% to 82.3% were produced by the gel casting technology of particle-stabilized ceramic foams with the solid loading of 5-25 vol%, then the Portland cement paste was cast in porous PZT ceramics with continuous vibration to fabricate 3-3 type cement-based piezoelectric composites. The microstructure, dielectric, piezoelectric, and electromechanical coupling properties of the composites were characterized. With the increase in initial solid loading of PZT slurry, both the porosity, open porosity and pore size of porous PZT ceramics decreased correspondingly, which have prevented the filling of cement paste into the porous ceramics and led to the increment of PZT content in the composites. Increase in the PZT content contributed to the relative permittivity (epsilon(r)) and longitudinal piezoelectric strain coefficient (d(33)), and a resultant reduction in piezoelectric voltage coefficient (g(33)). The prepared composites possessed a maximal thickness electromechanical coupling coefficient (K-t) value of 41.22%, higher than that of planar electromechanical coupling coefficient (K-p), indicating enhanced thickness mode oscillations of the composite. With the increase in PZT volume fraction, the PZT-cement composites turned from typical 3-3 structure to appoximate sandwich structure gradually, leading to more energy loss during electromechanical process and obvious decrease of the mechanical quality factor (Q(m)). The acoustic impedance (Z) of specimens ranged from 6.69 to 8.27 MRayls, close to that of cement materials (similar to 10 MRayls), making them promising candidate for application in civil engineering.

Damping Performance of Zn-Al/Pearlite Porous Composites under Vibration Circumstance

Experiment and numerical simulation of anti-penetration performance of composite structures

Preparation and Properties of Damping Materials in Multi-Phase System

A Study on the Damping Capacities of Mg–Zn–Y-Based Alloys with Lamellar Long Period Stacking Ordered Phases by Preparation Process

Interface Optimizing Core-Shell PZT@Carbon/Polyurethane Composites with Enhanced Passive Piezoelectric Vibration Damping Performance

Ultra‐Damping Composites Enhanced by Yolk–Shell Piezoelectric Damping Mechanism

Damping properties of aluminum matrix–fly ash composites

Research on mechanical properties of metal entangled structure‐silicone rubber composite vibration damping materials

Damping characterization and its underlying mechanisms in CNTs/AZ91D composite processed by cyclic extrusion and compression

Damping and mechanical behavior of graphene nanoplatelets reinforced Al-30Zn alloy matrix bioinspired laminated composites by two steps flake powder metallurgy

Investigation on Ultrasonic Velocity and Attenuation in ZrO2/Al-Si Fabricated by in-situ Reaction Method

Effect of texture on damping behaviour in ZK60 magnesium alloy

Damping and mechanical properties of SiC particles reinforced aluminium matrix composites prepared by colloidal dispersion and suction filtration method

Fabrication and properties of 3-3 type PZT-ordinary Portland cement composites

Enhanced shock performance by disperse porous structure:A case study in PZT95/5 ferroelectric ceramics

Effects of multi walled carbon nanotubes and multilayer graphene on the damping and quasi-static compressive mechanical properties of novel EP/ZA22 composites

Design and damping characterization of sandwich composite made of particle-filled hollow spheres and steel sheets

Electrical and Mechanical Properties of Metal-Particle-Dispersed PZT-Matrix Composites

The effect of vibration frequency on shear punch strength and wear resistance of AZ70 magnesium matrix composite manufactured by FSVP

Vibration Damping Properties of Gradient Polyurethane/vinyl Ester Resin Interpenetrating Polymer Network

Improving damping performance of fiberglass-reinforced resin matrix composites by designing viscoelastic sandwich layer