Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. With the quick advancement of the vehicle industry, attention to automobile safety has increased. Crash boxes, which are placed in front of the side rails, play an essential role in preventing much damage to the front part of the car and also protecting passengers. Improving and optimizing these crash boxes' energy absorption properties is necessary. In this study, a new structure of three-dimensional re-entrant auxetic has been presented for use as a crash box. Quasi-static uniaxial loading has been investigated experimentally and numerically. With the validation of the numerical simulation, the response surface method was implemented to investigate the value and type of different parameters' effect on peak load and specific absorbed energy. Variables of the base and re-entrant strut thicknesses (t1) and (t2), the length of the base to re-entrant strut (L/H), and the re-entrant angle (θ) were considered in three levels. Through ANOVA analysis in Design-Expert software, it was found that the parameters t2 and θ had the highest effect on the peak load, energy absorption, specific energy absorption, and mean crashing force responses. With the increasing of t2 and θ, all responses increase and decrease, respectively. Also, multi-objective optimization based on minimum peak load and maximum specific energy absorption was performed by the desirability function method in Design-Expert software and the Multi-Objective Particle Swarm Optimization (MOPSO) algorithm. The proposed optimized structure exhibits enhanced energy absorption when compared to the optimized cylindrical auxetic structure and the thin-walled circular structure within the peak load range below 80 kN. Therefore, the proposed structure due to low peak load, uniformity collapse in the force-displacement diagrams, and stability of the structure during compression loading, can be used as the crash box.

Design and Optimization of the Octagonal Step by Step Energy

Crashworthiness Design and Multiobjective Optimization for Hexagon Honeycomb Structure with Functionally Graded Thickness

Design of Straight-Retractable Energy-Absorbing Beam for Electric Cars and Its Crashworthiness Analysis

Optimizing crashworthiness design of square honeycomb structure

Crashworthiness Analysis and Multi-Objective Optimization for Concave I-Shaped Honeycomb Structure

Crashworthiness analysis and multi-objective optimization for honeycomb structures under oblique impact loading

Optimization Design of Longitudinal Beam Structure in Car Frontal Crash

Crashworthiness optimization method for sandwich plate structure under impact loading

Axial crashworthiness and multi-objective optimization of single-hat beams with sinusoidal cross-sections

Optimization Design of Energy-absorbing Panel of Front Beam for a Specific Vehicle

Axial crashworthiness design of double-hat beams with various cross-sections

Optimization Design of Body Structure in Offset Crash

Crashworthiness Design Optimization for an Evtol Aircraft.

Frontal crashworthiness structure analysis and optimization of electric vehicle

Vehicle safety optimization design under double standards

Optimal crashworthiness design of vehicle S-frame using macro-element method and evolutionary algorithm

Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

Crashworthiness Optimization Design Of Aluminum Alloy Thin-Walled Triangle Column Based On Bioinspired Strategy

Optimal Crashworthiness Design of a Spot-Welded Thin-Walled Hat Section

Crashworthiness design and multi-objective optimization of a novel auxetic hierarchical honeycomb crash box

Multi-objective crashworthiness optimization for a newly developed 3D re-entrant auxetic structure using response surface method and MOPSO algorithm