Abstract:Thin-walled cold-formed steel (CFS) structures are widely used in low-storey buildings and are seeing increased applications in multi-storey buildings as well as long-span structures. The bolted connection is one of the most common types of fasteners employed in CFS structures. The bolt slippage and load-bearing mechanism in CFS connections have a significant influence on the structural behaviour of cold-formed steel construction assemblies, which are typically numerically simulated using spring/connector elements. However, the determination of input parameters for the spring/connector elements generally requires load-deformation characteristics obtained from physical tests of lap joints, which are costly and time-consuming. Moreover, the use of spring/connector elements fails to explicitly capture the bolt bearing behaviour, resulting in inaccuracy in the simulation of CFS connections. In this paper, an accurate, efficient and robust numerical method that can fully replicate the behaviour of CFS connections considering both the effects of bolt slippage and bearing has been introduced. In the proposed numerical methodology, the cold-formed plates are modelled using the conventional shell elements, while a number of solid elements are introduced around the bolt holes, enabling the bolt-plate interaction to be explicitly accounted for, with contact pairs defined between the bolts and their surrounding solid element surfaces. The proposed numerical method could find a convergence solution using dynamic implicit solver in the general-purpose finite element (FE) software ABAQUS. Good agreement between the FE models using the proposed method and the available test results of CFS bolted connections were achieved, which sheds light on the promising application of the proposed method for simulating CFS assembled using bolted connections.

Flexural Strength of Bolt-Welded Composite Connections in Steel Frame Structures

Influence of high-strength bolted end-plate connections in composite frames

Bolted End Plate Connections for Steel Reinforced Concrete Composite Structures

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Finite Element Analysis of the Combined Connection with Bolts and Welds

Experimental study on shear performance of an advanced bolted connection in steel-concrete composite beams

Flexural Performance of Composite Beams Using High-Strength Steel and High-Strength Concrete

Comparative Study of Design Procedures for Cfst-To-Steel Girder Panel Zone Shear Strength

Analysis on Mechanical Properties of Bolt Connector under Reinforcement Binding and Welding Conditions Considering Flexural-shear Ratio

Finite Element Analysis of the Influence of Steel Strength on Beam- To- Column Composite Connections

Finite element analysis of bolt shear connection of steel-concrete composite structure

PROPOSED DESIGN METHOD OF COMBINED CONNECTIONS WITH BOLTS AND LONGITUDINAL WELDS FOR STEEL STRUCTURES

Investigations and proposed design rules on bolted connections for high strength steel

Column-to-Beam Flexural Strength Ratio for Rigorous Strong-Column–Weak-Beam Design for Steel–Concrete Composite Frames

Nonlinear finite element analysis of beam-to-column composite connections in steel structures

Flexural Performance of Rectangular Cfst Members

Analysis of bolted moment connections in cold-formed steel beam–column sub-frames

Flexural Strength Of High-Strength Steel-Concrete Composite Beams With Varying Steel Grades

Local buckling behavior of high strength steel welded I-section flexural members under uniform moment: