Abstract:Abstract Nanostructured YSZ is expected to exhibit a high strain tolerability due to its low Young’s modulus and consequently high durability. In this study, a porous YSZ as the thermal barrier coating was deposited by plasma spraying using an agglomerated nanostructured YSZ powder on a Ni-based superalloy Inconel 738 substrate with a cold-sprayed nanostructured NiCrAlY as the bond coat. The heat treatment in Ar atmosphere was applied to the cold-sprayed bond coat before deposition of YSZ. The isothermal oxidation and thermal cycling tests were applied to examine failure modes of plasma-sprayed nanostructured YSZ. The results showed that YSZ coating was deposited by partially melted YSZ particles. The nonmelted fraction of spray particles retains the porous nanostructure of the starting powder into the deposit. YSZ coating exhibits a bimodal microstructure consisting of nanosized particles retained from the powder and micro-columnar grains formed through the solidification of the melted fraction in spray particles. The oxidation of the bond coat occurs during the heat treatment in Ar atmosphere. The uniform oxide at the interface between the bond coat and YSZ can be formed during isothermal test. The cracks were observed at the interface between TGO/BC or TGO/YSZ after thermal cyclic test. However, the failure of TBCs mainly occurred through spalling of YSZ within YSZ coating. The failure characteristics of plasma-sprayed nanostructured YSZ are discussed based on the coating microstructure and formation of TGO on the bond coat surface.

Microstructure and Thermal Properties of Nanostructured 4 Wt.%al 2 O 3 -YSZ Coatings Produced by Atmospheric Plasma Spraying

Thermal Cyclic Life and Failure Mechanism of Nanostructured 13 Wt%Al2o3 Doped Ysz, Coating Prepared by Atmospheric Plasma Spraying

Thermal stability of nanostructured 13wt% Al2O3–8wt% Y2O3–ZrO2 thermal barrier coatings

Study of microstructure, electronic structure and thermal properties of Al2O3-doped tetragonal YSZ coatings

Microstructure, phase stability and thermal conductivity of plasma sprayed Yb2O3, Y2O3 co-stabilized ZrO 2 coatings

Microstructure and Thermal Properties of Nanostructured 8 Wt.% Ceo2 Doped Ysz Coatings Prepared by Atmospheric Plasma Spraying

Investigation of microstructure changes in Al2O3-YSZ coatings and YSZ coatings and their effect on thermal cycle life

Effect of Microstructure on the Thermal Conductivity of Plasma Sprayed Y2O3 Stabilized Zirconia (8% YSZ)

Microstructure, Thermal Conductivity and Thermal Cycling Behavior of Thermal Barrier Coatings Prepared by Plasma Spray Physical Vapor Deposition

Comparison of Thermal Insulation Capability Between Conventional and Nanostructured Plasma Sprayed YSZ Coating on Ni 3 Al Substrates

RELATION BETWEEN MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF PLASMA-SPRAYED 8YSZ COATING

Thermal Cycling Behavior of Nanostructured and Conventional Yttria-Stabilized Zirconia Thermal Barrier Coatings Via Air Plasma Spray

Thermal properties of plasma-sprayed thermal barrier coating with bimodal structure

The Microstructure and Properties of Gd2O3 Doped YSZ Coatings Produced by Atmospheric Plasma Spraying

Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold Sprayed Nanostructured NiCrAlY Bond Coat

Microstructure and Thermal Properties of Plasma Sprayed Thermal Barrier Coatings from Nanostructured YSZ

Microstructure and Deposition Mechanism of Suspension Plasma Spraying Thermal Barrier Coatings

Influence of Microstructure on Thermal Conductivity of Plasma-Sprayed YSZ Coating

Microstructure of Plasma Sprayed La2O3-Modified YSZ Coatings

AYSZ coating preparation and its microstructure and properties

Thermal Properties of Plasma-Sprayed (La0.4sm0.5yb0.1)2-Zr2o7 Coatings on NiCrCoAlY Bond Coats