Abstract:In this study, a yttria-stabilized zirconia (YSZ) ceramic matrix abradable sealing coating named 8YSZ-5 was successfully prepared by mixed solution precursor plasma spraying, and its thermal shock behavior was studied in detail. During the thermal shock cycles, the microstructure, residual stress and phase stability of the 8YSZ-5 coating were examined by using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) technique. The results show that the 8YSZ-5 coating has excellent thermal shock resistance through a 200-cycle thermal shock test at 1150 degrees C. During the thermal shock cycles, the spallation only existed in a small scale in the edge of the 8YSZ-5 coating, and the coating always maintains a stable phase composition of tetragonal structure. The residual stress study shows that the in-plane residual stress of the 8YSZ-5 coating is detected to be compressive stress, which increases with increasing the thermal shock cycles. The microstructure analysis shows that as the thermal shock test progresses, the number of the pores in the coating gradually decreases due to their spontaneous closure and the average size of the grains gradually increases. The mechanical properties investigation shows that the hardness and surface friction coefficient of the 8YSZ-5 abradable sealing coating increase gradually, while the bond strength of the coating decreases by 50% after 200 thermal shock cycles. The implications of this study are important for the design of advanced abradable sealing coatings prepared by the mixed solution precursor plasma spraying technology.

AYSZ coating preparation and its microstructure and properties

Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5mol% YSZ coating

A Preliminary Microstructure Investigation of YSZ Coatings Deposited by Plasma Spray-Physical Vapor Deposition Using a Shrouded Plasma Torch

A Study on YSZ Abradable Seal Coatings Prepared by Atmospheric Plasma Spray and Mixed Solution Precursor Plasma Spray

Preparation and Characterization of YSZ Abradable Sealing Coating Through Mixed Solution Precursor Plasma Spraying

Effect of spraying power on the morphology of YSZ splat and micro-structure of thermal barrier coating

Reactive deposition of CYSZ coatings using PS-PVD technology

TEM Exploration of In-Situ Nanostructured Composite Coating Fabricated by Plasma Spraying 8Ysz-Al-sic Composite Powder

Study on Thermal Shock Behavior of YSZ Abradable Sealing Coating Prepared by Mixed Solution Precursor Plasma Spraying

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Phase, microstructure and property evolutions of reactively synthesized YSZ-ZrC composite coating based on the content regulation of the precursor

A TEM Study of the Bonded Splat Interface Microstructure of Plasma-Sprayed YSZ Coating

Microstructure and Deposition Mechanism of Suspension Plasma Spraying Thermal Barrier Coatings

Study of microstructure, electronic structure and thermal properties of Al2O3-doped tetragonal YSZ coatings

Investigation of microstructure changes in Al2O3-YSZ coatings and YSZ coatings and their effect on thermal cycle life

Defects/Cmas Corrosion Resistance Relationship in Plasma Sprayed Ypsz Coating

Microstructure Of Ysz Coatings Deposited By Ps-Pvd Using 45kw Shrouded Plasma Torch

Microstructural study of nanostructured Zro 2 based thermal barrier coatings fabricated by high efficiency supersonic plasma spraying

EBSD analysis of microstructure changes in YSZ coatings during thermal cycling

RELATION BETWEEN MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF PLASMA-SPRAYED 8YSZ COATING

Characteristics of Thick Columnar YSZ Coatings Fabricated by Plasma Spray-Physical Vapor Deposition